Accessories lifts
Accessories for workshop lifts can seriously make a difference. Our selection of accessories lifts includes kits, rubber pads, covers and much more.
Showing 1–99 of 482 results
Adapter spigot 55 to 35 mm | for traverse ATT 3,2 C / jack | 135 mm
Reduction from 55 to 35 mm, necessary when using the traverse ATT 3,2 C with 55 mm spigot on a jack (e.g. Junior Jack) with 35 mm mounting hole
Aggregate plate with supporting arms GA P (Porsche)
A particularly versatile aggregate plate for the removal and installation of engines, transmissions, axles, exhaust systems, etc.
Agricultural adapters 1 set / 2 pieces
To lift agricultural tractor | front and rear adapter
Brakets for 3D alignment
1 set / 2 pieces
Cable reel
Neatly tidied up by means of a cable reel on the wall or on-site column, the system can be controlled via an operating bottle.
Cable remote control
For capacity 3000 / 4000 / 5500 (excluded N version) / 7000 / 8500 / 10000 kg
Cable set for fixed lifting unit | 25 m
1 piece
Cable set for fixed lifting unit | 40 m
1 piece
Cable suspension with balancer 1HT
1 piece / 7.5 m | Cleanly tidy by means of cable suspension on the wall or ceiling and without disturbing cables on the floor, the system can be controlled via a control bottle.
Cassette extended (primary coated)
Incl. galvanized slide covering, per meter
Column connection cable extension by “m” meter
Cables between columns “m” meters longer than standard
Connection template
For front/back base connection | necessary for lift installation
Control unit C1 | for Duplex T2 | Standard
Control unit C1 | for Duplex T3 | Standard
Control unit C2 | for Duplex T2 | Classic
Control unit “Standard” with additional connections for radio remote control and rest position switch
Control unit C2 | for Duplex T3 | Classic
Control unit “Standard” with additional connections for radio remote control and rest position switch
Control unit C3 | for Duplex T2 | Plus
Control unit “Classic” with additional connections for axis distance preselection with 9 positions and rest position switch
Control unit C3 | for Duplex T3 | Plus
Control unit “Classic” with additional connections for axis distance preselection with 9 positions and rest position switch
Control unit C4 | for Duplex T2 | Premium, with touchdisplay
Control unit “Plus” with aadditional connections for axis distance pre-selection for 200 positions, error message in plain text, stroke counter and display with stage setup, stroke and punch position
Control unit C4 | for Duplex T3 | Premium, with touchdisplay
Control unit “Plus” with aadditional connections for axis distance pre-selection for 200 positions, error message in plain text, stroke counter and display with stage setup, stroke and punch position
Cross beam max. 20000 kg
Crossbar for standard lifts with adjustable fork
Displacement sensor
Sensor for automatic post positioning (axle distance preselection), 1 piece per movable lifting stamp, cable set must be ordered separately (item no. 126665)
Drive-on plates Aluminium
for easy positioning of the support arms under the vehicle (1 set / 4 pieces)
Drive-on ramp kit
2950 mm, ground ramps | floor installation kit for lifts | 1 set / 2 pieces
Drive-on ramp kit
3700 mm, ground ramps | floor installation kit for lifts | 1 set / 2 pieces
Drive-through ramp kit
For RAV4651L | 1 set / 2 pieces
Extension for traverse ATT 3,2 C | 127 mm
2 pieces
Extension for traverse ATT 3,2 C | 80 mm
2 pieces
Factory assembly of the play detector on the lift
of the play detector on the lift
Frame extended (primary copated)
Incl. galvanised slide covering, per meter
Frame with overhang
galvanised execution, incl. galvanised slide covering, each piece
Frame with overhang
incl. galvanised slide covering, each piece
Hose extension
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
Hose extension
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
Hose extension
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
Hose extension
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
Hose extension
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
Installation frame long, 6750 mm | for fixed lifting ram / floor-mounted traverse | galvanized
to be set in concrete, 4500 mm movable
Installation frame long, 6750 mm | for fixed lifting ram / floor-mounted traverse | painted
to be set in concrete, 4500 mm movable
Installation frame long, 6750 mm | for fixed lifting ram / recessed traverse in parking position| galvanized
to be set in concrete, 4500 mm movable
Installation frame long, 6750 mm | for fixed lifting ram / recessed traverse in parking position| painted
to be set in concrete, 4500 mm movable
Installation frame short, 1624 mm | for fixed lifting ram / floor-mounted traverse | galvanized
to be set in concrete
Installation frame short, 1624 mm | for fixed lifting ram / floor-mounted traverse | painted
to be set in concrete
Installation frame short, 1624 mm | for fixed lifting ram / recessed traverse in parking position| galvanized
to be set in concrete
Installation frame short, 1624 mm | for fixed lifting ram / recessed traverse in parking position| painted
to be set in concrete
Installation tub long | for fixed lifting ram / floor-mounted traverse | primed & painted
to be set in concrete, 4500 mm movable
Installation tub long | for fixed lifting ram / recessed traverse in parking position | primed & painted
to be set in concrete, 4500 mm movable
Installation tub short | for fixed lifting ram / floor-mounted traverse | primed & painted
to be set in concrete
Installation tub short | for fixed lifting ram / recessed traverse in parking position | primed & painted
to be set in concrete
Jacking beam
13.5 t, hand pump
Jacking beam VAS 791023/1
4.0 t
Language package DE | for Duplex T2 / T3
Signs + Circuit diagram DE
Language package EN | for Duplex T2 / T3
Signs + circuit diagram EN
Language package ES | for Duplex T2 / T3
Signs + circuit diagram ES
Language package FR | for Duplex T2 / T3
Signs + circuit diagram FR
Language package IT | for Duplex T2 / T3
Signs + circuit diagram IT
Language package NL | for Duplex T2 / T3
Signs + circuit diagram NL
Lifting bracket
Lifting ram fixed | for installation frame of a floor-mounted traverse
Lifting ram fixed | for installation frame of a recessed traverse
Lifting ram fixed | pre-assembled in short installation tub | for floor-mounted traverse
Lifting ram fixed | pre-assembled in short installation tub | with parking position for recessed traverse
Lifting ram movable | for installation frame of a floor-mounted traverse
Lifting ram movable | for installation frame of a recessed traverse
Lifting ram movable | for installation tub of a floor-mounted traverse
Lifting ram movable | for installation tub of a recessed traverse
Lifting ram movable | pre-assembled in long installation tub | for floor-mounted traverse
Lifting ram movable | pre-assembled in long installation tub | with parking position for recessed traverse
Mobile control device
For electro-hydraulic mobile column lifts
Mounting kit for tubular frame of flexcover guide in pit
1 Satz, for one long frame, usable from pit depth > 1.5 m (frame version)
Mounting set for buses
Scope of delivery: 2x spacer 60 mm 2x spacer 100 mm 2x mounting fork 40/160/30 2x supporting plate 140/100/16 with aluminum support 2x mounting spigot Ø 50/30
Mounting set Universal Duplex
For trucks and buses
Nuts wear check-tool
Pads
Prism | for Mercedes Sprinter, VW Crafter – rear / for SPO65E | 1 set / 2 pieces
Pads VAS 6355A/2
Mandrel, long | for Mercedes Sprinter, VW Crafter – front / for SPO65 | 1 set / 2 pieces
Pendant control station for Duplex T2 control unit C1 (Standard)
incl. 15 m cabel
Pendant station for Duplex T3 control unit C1 (Standard)
incl. 15 m cabel
Pendant station for Duplex T3 control unit C2 / C3 / C4 (Classic / Plus / Premium)
incl. 15 m cabel
Pick-up adapter for SPO55
2 x left / 2 x right, 1250 kg each | not compatible with AE-250 | 1 set / 4 pieces
Pipe cover 1 m
For surface installation of lifts
Pit expansion BusStop
Abstract segment
Pit frame Type A
weight: 46 kg/m, a = 870 mm, per meter
Pit frame Type A
weight: 46 kg/m, a = 870 mm, per meter
Pit frame Type B
weight: 55Kg/m, a = 940 mm, per meter
Pit frame Type B
weight: 55 kg/m, a = 940 mm, per meter
Pit frame Type B1
weight: 42 kg/m, a = 940 mm, per meter
Pit frame Type B1
weight: 42 kg/m, a = 940 mm, per meter
Pit frame Type E
weight: 82 kg/m, a = 940 mm, per meter
Pit frame Type E
weight: 82 kg/m, a = 940 mm, per meter
Pit frame Type E1
weight: 69 kg/m, a = 940 mm, per meter
Pit frame Type E1
weight: 69 kg/m, a = 940 mm, per meter
Pit frame Type F
weight: 71.4 kg/m, a = 940 mm, per meter
Pit frame Type F
weight: 71.4 kg/m, a = 940 mm, per meter
Pit frame Type F1
weight: 62.5 kg/m, a = 940 mm, per meter, galvanised (both side)
Pit frame Type F1
weight: 62.5 kg/m, a = 940 mm, per meter, primecoated (both side)
Power unit driver side | 13.12 ft
Power unit driver side | 16.40 ft
Power unit driver side | 6.56 ft
Power unit driver side | 9.84 ft