Trucks
Showing 199–297 of 557 results
Cable suspension
Balancer to disconnect hand-held control panel
Lowered traverse
Can travel along the whole adjusting range at floor level
Lowered traverse
In defined position, fitted at floor level
Pad A 120
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 120 mm | with handles | 1 piece
Pad A 50
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 50 mm | 1 piece
Pad A 60
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 60 mm | 1 piece
Pad E 140/100
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | 1 piece
Pad E 190/230
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | for traverse TEF 107445 | 1 piece
Pad E 270/230
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | for traverse TEFV 11132 | 1 piece
Pad G 145/150
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
Pad G 185/150
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
Pad G 220/110
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
Pad G 260/190
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
Pad G 30/80
Supporting fork | load capacity 15 t, peg Ø 75 mm | 1 piece
Pad G 40/150
Supporting fork, standard | load capacity 15 t, peg Ø 75 mm | 1 piece
Pad G 40/90
Supporting fork | load capacity 15 t, peg Ø 75 mm | for supporting low-floor buses (MAN and DB CITARO) at the front axle | 1 piece
Pad G 50/60
Supporting fork | load capacity 15 t, peg Ø 75 mm | 1 piece
Pad R 116
Support plate, rubber pad, round | load capacity 15 t, peg Ø 75 mm, Ø 116 mm | 1 piece
Pad R 150
Support plate, rubber pad, round | load capacity 15 t, peg Ø 75 mm, Ø 150 mm | 1 piece
Roll cover Flexcover
driveable with 5.0t wheel load, galvanized
Spacer D 100
15 t, peg Ø 75 mm, 100 mm | 1 piece
Spacer D 200
15 t, peg Ø 75 mm, 200 mm | 1 piece
Spacer D 60
15 t, peg Ø 75 mm, 60 mm | 1 piece
Temporary cover
Wooden slats to insert in frame, capacity: max. 100 kg/m², per meter
Transport trolley for traverse TS
Traverse set TP
Especially suitable for the reception of downhill tracks
Traverse T
Traverse TA
Traverse TS
2180 x 203 mm | special traverse complete
Trolley SmartCart
for DUPLEX load-carrying equipment, incl. 4 swiveling rollers
Truck traverse TEF-15 | Universal
1 piece, 1-fold telescopic, adjustment range 710 – 1040 mm (510 – 840 mm), load capacity 15 t (center)
Truck traverse TTS-15 | Double extension
15 t (center), 2-fold telescopic, adjustment range 880 – 1500 mm (520 – 1140 mm)
Universal support Ø 35 mm
Mounting hole Ø 35 mm, suitable for holding various tools, such as the transmission plate GA passenger car | fitted with a bushing
Floor leveling for HDVL 25/35-130/145-I
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 13/14,5 m platform length
Floor leveling for HDVL 25/35-130/145-I | galvanized
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 13/14.5 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length | hot galvanized version
Adaption for flywheel cDISK
Positive fit by means of hexagon bolts, diameter: 450 mm, yellow chromated, weight: 1.5 kg, load bearing capacity: 80 kg, additional pitch circle diameter 410 mm + 375 mm
Cassette extended (primary coated)
Incl. FLEXCOVER, per meter
Cassette galvanized
Instead of primary coat, per meter
Cross-beam for ArtisLift MRG55
15 t
EvoBus Extra kit for pressure plate cDISK
yellow-chromatised, capacity: 80 kg
Frame extended (primary copated)
Incl. FLEXCOVER, per meter
Frame galvanized
Instead of primary coat, per meter
Frame with overhang
Frame, galvanised execution, incl. FLEXCOVER, each piece
Frame with overhang
Frame incl. FLEXCOVER, each piece
MRG-Kit for MRG-55
10 m power cable with CEE plug and 1 litre spindle oil | 1 set – only valid for ArtisLift MRG-55 with 4 lifting units, when expanding to a set of 6 or 8, 2 units must be ordered
Pump sump
for lift cassette
Wheel fork extension for ArtisLift MRG55
Length approx. 123 mm | load capacity is reduced to 5 t | 1 set (for 1 wheel gripper)
Wheel fork für ArtisLift MRG55
Adjustable, wheel Ø 500 – 1200 mm | factory assembled – cannot be retrofitted | 1 piece
Wheel fork reduction for mobile column lifts | tires Ø 800 – 700 mm
Reduction of the wheel fork for tires from Ø 800 mm to Ø 700 mm | 1 piece/per column
Floor leveling for HDVL 25/35-100-I
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 10 m platform length
Floor leveling for HDVL 25/35-100-I | galvanized
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 10 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length | hot galvanized version
Floor leveling for HDVL 25/35-110-I | galvanized
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 11 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length | hot galvanized version
Floor leveling for HDVL 25/35-120-I | galvanized
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 12 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length | hot galvanized version
Floor leveling for HDVL 25/35-60-I | galvanized
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 6 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length | hot galvanized version
Floor leveling for HDVL 25/35-80-I
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 8 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length
Floor leveling for HDVL 25/35-80-I | galvanized
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 8 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length | hot galvanized version
Floor leveling for HDVL 25/35-90-I
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 9 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length
Floor leveling for HDVL 25/35-90-I | galvanized
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 9 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length | hot galvanized version
Floor stand
1000 mm wide (for T/L-5 platform)
Floor stand
800 mm wide (for T/L-4 platform)
Retrofit kit Fast clamps
CCD kit for 3D Quick-clamps (VSG.FC167.701916 to VSG.FC169.701923) | 1 set / 2 pieces
Accessories holder for Portal Lift
6 slots, attached to lifting unit
C-clip cDISK
For the installation and removal of couplings and control disks in a restricted installation space,rn(E.g. Cross-linking, connection only with basic device cDISK 3745410) capacity 80 kg
Die cast housing cDISK
yellow-chromatised, weight: 6 kg, capacity: 80 kg
Kit MRG pour ArtisLift MRG-25-4
10 m power cable with CEE plug, incl. 1 litre spindle oil | 1 set – only valid for ArtisLift MRG-25 with 4 lifting units
Pad
Steel clamp | load capacity 17 t | 1 piece
Support plate mount
1 included in the scope of delivery, 1 more recommended if the distance between the mounting points is less than 550 mm
Water drain/filter combination for Portal Lift 17 Vario
Water separator, fitted in factory | to protect the control system and pump from harmful condensation | max. operating pressure 16 bar
Oil-water separator Öwamat 10
For compressor capacities up to 58.5 m³/min
Vertical scissor lift ExaLift HDVL 25-60-I-HG
25 t, platform length 6000 mm, electro-hydraulic, safety latch, inground, hot galvanized version, control unit lacquered
Vertical scissor lift ExaLift HDVL 25-60-I
25 t, platform length 6000 mm, electro-hydraulic, safety latch, inground, lacquered version
Vertical scissor lift ExaLift HDVL 25-80-I-HG
25 t, platform length 8000 mm, electro-hydraulic, safety latch, inground, hot galvanized version, control unit lacquered
Vertical scissor lift ExaLift HDVL 25-80-I
25 t, platform length 8000 mm, electro-hydraulic, safety latch, inground, lacquered version
Vertical scissor lift ExaLift HDVL 25-90-I-HG
25 t, platform length 9000 mm, electro-hydraulic, safety latch, inground, hot galvanized version, control unit lacquered
Vertical scissor lift ExaLift HDVL 25-90-I
25 t, platform length 9000 mm, electro-hydraulic, safety latch, inground, lacquered version
Vertical scissor lift ExaLift HDVL 25-100-I-HG
25 t, platform length 10000 mm, electro-hydraulic, safety latch, inground, hot galvanized version
Vertical scissor lift ExaLift HDVL 25-100-I
25 t, platform length 10000 mm, electro-hydraulic, safety latch, inground, lacquered version
Vertical scissor lift ExaLift HDVL 25-110-I-HG
25 t, platform length 11000 mm, electro-hydraulic, safety latch, inground, hot galvanized version, control unit lacquered
Vertical scissor lift ExaLift HDVL 25-110-I
25 t, platform length 11000 mm, electro-hydraulic, safety latch, inground, lacquered version
Vertical scissor lift ExaLift HDVL 25-120-I-HG
25 t, platform length 12000 mm, electro-hydraulic, safety latch, inground, hot galvanized version, control unit lacquered
Vertical scissor lift ExaLift HDVL 25-120-I
25 t, platform length 12000 mm, electro-hydraulic, safety latch, inground, lacquered version
Vertical scissor lift ExaLift HDVL 25-130-I-HG
25 t, platform length 13000 mm, electro-hydraulic, safety latch, inground, hot galvanized version, control unit lacquered
Vertical scissor lift ExaLift HDVL 25-130-I
25 t, platform length 13000 mm, electro-hydraulic, safety latch, inground, lacquered version
Vertical scissor lift ExaLift HDVL 25-145-I-HG
25 t, platform length 14500 mm, electro-hydraulic, safety latch, inground, hot galvanized version, control unit lacquered
Vertical scissor lift ExaLift HDVL 25-145-I
25 t, platform length 14500 mm, electro-hydraulic, safety latch, inground, lacquered version
Vertical scissor lift ExaLift HDVL 35-60-I
35 t, platform length 6000 mm, electro-hydraulic, safety latch, inground, lacquered version
Vertical scissor lift ExaLift HDVL 35-60-I-HG
35 t, platform length 6000 mm, electro-hydraulic, safety latch, inground, hot galvanized version
Vertical scissor lift ExaLift HDVL 35-80-I
35 t, platform length 8000 mm, electro-hydraulic, safety latch, inground, lacquered version
Vertical scissor lift ExaLift HDVL 35-80-I-HG
35 t, platform length 8000 mm, electro-hydraulic, safety latch, inground, hot galvanized version
Vertical scissor lift ExaLift HDVL 35-90-I-HG
35 t, platform length 9000 mm, electro-hydraulic, safety latch, inground, hot galvanized version
Vertical scissor lift ExaLift HDVL 35-90-I
35 t, platform length 9000 mm, electro-hydraulic, safety latch, inground, lacquered version
Vertical scissor lift ExaLift HDVL 35-100-I-HG
35 t, platform length 10000 mm, electro-hydraulic, safety latch, inground, hot galvanized version, control unit lacquered
Vertical scissor lift ExaLift HDVL 35-100-I
35 t, platform length 10000 mm, electro-hydraulic, safety latch, inground, lacquered version
Vertical scissor lift ExaLift HDVL 35-110-I-HG
35 t, platform length 11000 mm, electro-hydraulic, safety latch, inground, hot galvanized version
Vertical scissor lift ExaLift HDVL 35-110-I
35 t, platform length 11000 mm, electro-hydraulic, safety latch, inground, lacquered version
Vertical scissor lift ExaLift HDVL 35-120-I-HG
35 t, platform length 12000 mm, electro-hydraulic, safety latch, inground, hot galvanized version
Vertical scissor lift ExaLift HDVL 35-120-I
35 t, platform length 12000 mm, electro-hydraulic, safety latch, inground, lacquered version
Vertical scissor lift ExaLift HDVL 35-130-I-HG
35 t, platform length 13000 mm, electro-hydraulic, safety latch, inground, hot galvanized version
Vertical scissor lift ExaLift HDVL 35-130-I
35 t, platform length 13000 mm, electro-hydraulic, safety latch, inground, lacquered version