Trailer
Showing 100–198 of 302 results
Diagnostic kit STDADIAG
IDC5 KIT TEXA – for diagnostic wheel alignment | kit for those who have a wheel alignment but no TEXA accessories
Diagnostic kit STDADIAG/SW
TEXA IDC5 SW KIT – for diagnostic wheel alignment | kit for those who already have TEXA devices (e.g., ADAS RCSS)
Supporting bridge SPZ-15
Axial traverse ATEB S2
7.5 – 15 t, peg Ø 45 mm
Pad H
Wooden clamp | load capacity 20 t, peg Ø 80 mm | 1 piece
Pad U
Support plate, fork | load capacity 15 t, peg Ø 35 mm | 1 piece
Pad X
Steel clamp | load capacity 30 t, peg Ø 80 mm | 1 piece
Pad X
Steel clamp | load capacity 15 t, peg Ø 35 mm | 1 piece
Supporting Package I
30 t, peg Ø 80 mm, navigable
Supporting Package II
30 t, peg Ø 80 mm, navigable
Supporting Package IV
30 t, peg Ø 80 mm, navigable
Traverse ATS
30 t, peg Ø 80 mm
Traverse ATS
20 t, peg Ø 80 mm
Traverse for HydroLift S3 7,5/8,2
16.4 t
Traverse for HydroLift S3 7,5/8,2
Max. load bearing capacity 16.4 t, king pin support | only in conjunction with traverse (item no. 119777)
Wheel clamps Fast clamps
Quick-clamps | for CCD wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, clamps weight 3.8 kg (per set) | 1 set / 2 pieces
Wheel clamps Fast clamps
Quick-clamps | for 3D wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, clamps weight 3.5 kg (per set) | 1 set / 2 pieces
Protection cover for HydroLift 6,2/7,5
Flexible, sturdy protective cover with magnets to prevent splashing water | Only for battery-powered wheel grippers | 1 piece
Traverse for HydroLift 6,2
12.4 t
Traverse for HydroLift 6,2
Max. load bearing capacity 12.4 t, king pin support | only in conjunction with traverse (item no. 120204)
Protection cover for HydroLift 8,2
Flexible, sturdy protective cover with magnets to prevent splashing water | Only for battery-powered wheel grippers | 1 piece
Bus traverse BEFV-15
Wide, extended version with extendable sliding pieces, extra flat, adjustment range 870 – 1200 mm (510 – 840 mm), load capacity 15 t (center) | 1 piece
Lowered traverse
Can travel along the whole adjusting range at floor level
Lowered traverse
In defined position, fitted at floor level
Pad A 120
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 120 mm | with handles | 1 piece
Pad A 50
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 50 mm | 1 piece
Pad A 60
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 60 mm | 1 piece
Pad E 140/100
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | 1 piece
Pad E 190/230
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | for traverse TEF 107445 | 1 piece
Pad E 270/230
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | for traverse TEFV 11132 | 1 piece
Pad G 145/150
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
Pad G 185/150
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
Pad G 220/110
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
Pad G 260/190
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
Pad G 30/80
Supporting fork | load capacity 15 t, peg Ø 75 mm | 1 piece
Pad G 40/150
Supporting fork, standard | load capacity 15 t, peg Ø 75 mm | 1 piece
Pad G 40/90
Supporting fork | load capacity 15 t, peg Ø 75 mm | for supporting low-floor buses (MAN and DB CITARO) at the front axle | 1 piece
Pad G 50/60
Supporting fork | load capacity 15 t, peg Ø 75 mm | 1 piece
Pad R 116
Support plate, rubber pad, round | load capacity 15 t, peg Ø 75 mm, Ø 116 mm | 1 piece
Pad R 150
Support plate, rubber pad, round | load capacity 15 t, peg Ø 75 mm, Ø 150 mm | 1 piece
Spacer D 100
15 t, peg Ø 75 mm, 100 mm | 1 piece
Spacer D 200
15 t, peg Ø 75 mm, 200 mm | 1 piece
Spacer D 60
15 t, peg Ø 75 mm, 60 mm | 1 piece
Transport trolley for traverse TS
Traverse set TP
Especially suitable for the reception of downhill tracks
Traverse T
Traverse TA
Traverse TS
2180 x 203 mm | special traverse complete
Trolley SmartCart
for DUPLEX load-carrying equipment, incl. 4 swiveling rollers
Truck traverse TEF-15 | Universal
1 piece, 1-fold telescopic, adjustment range 710 – 1040 mm (510 – 840 mm), load capacity 15 t (center)
Truck traverse TTS-15 | Double extension
15 t (center), 2-fold telescopic, adjustment range 880 – 1500 mm (520 – 1140 mm)
Universal support Ø 35 mm
Mounting hole Ø 35 mm, suitable for holding various tools, such as the transmission plate GA passenger car | fitted with a bushing
Cross-beam for ArtisLift MRG55
15 t
MRG-Kit for MRG-55
10 m power cable with CEE plug and 1 litre spindle oil | 1 set – only valid for ArtisLift MRG-55 with 4 lifting units, when expanding to a set of 6 or 8, 2 units must be ordered
Wheel fork extension for ArtisLift MRG55
Length approx. 123 mm | load capacity is reduced to 5 t | 1 set (for 1 wheel gripper)
Wheel fork für ArtisLift MRG55
Adjustable, wheel Ø 500 – 1200 mm | factory assembled – cannot be retrofitted | 1 piece
Wheel fork reduction for mobile column lifts | tires Ø 800 – 700 mm
Reduction of the wheel fork for tires from Ø 800 mm to Ø 700 mm | 1 piece/per column
Floor stand
1000 mm wide (for T/L-5 platform)
Floor stand
800 mm wide (for T/L-4 platform)
Retrofit kit Fast clamps
CCD kit for 3D Quick-clamps (VSG.FC167.701916 to VSG.FC169.701923) | 1 set / 2 pieces
Accessories holder for Portal Lift
6 slots, attached to lifting unit
Kit MRG pour ArtisLift MRG-25-4
10 m power cable with CEE plug, incl. 1 litre spindle oil | 1 set – only valid for ArtisLift MRG-25 with 4 lifting units
Pad
Steel clamp | load capacity 17 t | 1 piece
Support plate mount
1 included in the scope of delivery, 1 more recommended if the distance between the mounting points is less than 550 mm
Water drain/filter combination for Portal Lift 17 Vario
Water separator, fitted in factory | to protect the control system and pump from harmful condensation | max. operating pressure 16 bar
In ground truck lift DUPLEX T 4-15-1900 R
4 lifting unit, 4 x 15 t, length of frame: 21 m, 1900 mm stroke, galvanized roll cover FLEXCOVER
In ground truck lift DUPLEX T 4-15-1900 W
4 lifting unit, 4 x 15 t, length of cassette: 21 m, 1900 mm stroke, galvanized roll cover FLEXCOVER
In ground truck lift DUPLEX T 5-15-1900 R
5 lifting unit, 5 x 15 t, length of frame: 25 m, 1900 mm stroke, galvanized roll cover FLEXCOVER
In ground truck lift DUPLEX T 5-15-1900 W
5 lifting unit, 5 x 15 t, length of frame: 25 m, 1900 mm stroke, galvanized roll cover FLEXCOVER
In ground truck lift DUPLEX T 6-15-1900 R
6 lifting unit, 6 x 15 t, length of frame: 30 m, 1900 mm stroke, galvanized roll cover FLEXCOVER
In ground truck lift DUPLEX T 6-15-1900 W
6 lifting unit, 6 x 15 t, length of cassette: 30 m, 1900 mm stroke, galvanized roll cover FLEXCOVER
Mobile column lift HydroLift S3 1-6,2
1 x 6.2 t, electrohydraulic, wireless, battery powered | Extension column to form a set of 3 or 5 – ideal for the agricultural sector
Mobile column lift HydroLift S3 2-6.2 (wireless)
2 x 6.2 t, electrohydraulic, wireless, battery powered
Mobile column lift HydroLift S3 4-6.2 (wireless)
4 x 6.2 t, electrohydraulic, wireless, battery powered
Mobile column lift HydroLift S3 6-6.2 (wireless)
6 x 6.2 t, electrohydraulic, wireless, battery powered
Mobile column lift HydroLift S3 8-6.2 (wireless)
8 x 6.2 t, electrohydraulic, wireless, battery powered
Mobile column lift HydroLift S3 1-7.5 (wireless)
1 x 7.5 t, electrohydraulic, wireless, battery powered | Extension column to form a set of 3 or 5 – ideal for the agricultural sector
Mobile column lift HydroLift S3 2-7.5 (wireless)
2 x 7.5 t, electrohydraulic, wireless, battery powered
Mobile column lift HydroLift S3 4-7.5 (wireless)
4 x 7.5 t, electrohydraulic, wireless, battery powered
Mobile column lift HydroLift S3 6-7.5 (wireless)
6 x 7.5 t, electrohydraulic, wireless, battery powered
Mobile column lift HydroLift S3 8-7.5 (wireless)
8 x 7.5 t, electrohydraulic, wireless, battery powered
Mobile column lift HydroLift S3 1-8,2
1 x 8.2 t, electrohydraulic, wireless, battery powered | Extension column to form a set of 3 or 5 – ideal for the agricultural sector | Grey (RAL 7016)
Mobile column lift HydroLift S2 2-8,2
2 x 8.2 t, electrohydraulic, wireless, battery powered
Mobile column lift HydroLift S2 4-8,2
4 x 8.2 t, electrohydraulic, wireless, battery powered
Mobile column lift HydroLift S2 6-8,2
6 x 8.2 t, electrohydraulic, wireless, battery powered
Mobile column lift HydroLift S2 8-8,2
8 x 8.2 t, electrohydraulic, wireless, battery powered
Mobile column lift HydroLift S3 2-6.2 Agrar
2 x 6.2 t, electrohydraulic, wireless, battery powered, with agricultural adapters
Mobile column lift HydroLift S3 2-7.5 Agrar
2 x 7.5 t, electrohydraulic, wireless, battery powered, with agricultural adapters
Mobile column lift HydroLift S2 8.2 Agrar
2 x 8.2 t, electrohydraulic, wireless, battery powered, with agricultural adapters
Mobile column lifts combination HydroLift Agrar III
2 x 5.0 t + 1 x 8.2 t, electrohydraulic, wireless, battery powered | 3-piece composite in combination of mobile column lift HydroLift S2 Agrar 2-5 (item no. 128255) and mobile column lift HydroLift S3 1-8,2 (item no. 128536) | Grey (RAL 7016)
Mobile column lift HydroLift S3 2-6.2
2 x 6.2 t, electrohydraulic, cable-bound
Mobile column lift HydroLift S3 4-6.2
4 x 6.2 t, electrohydraulic, cable-bound
Mobile column lift HydroLift S3 6-6.2
6 x 6.2 t, electrohydraulic, cable-bound
Mobile column lift HydroLift S3 8-6.2
8 x 6.2 t, electrohydraulic, cable-bound
Mobile column lift HydroLift S3 2-7.5
2 x 7.5 t, electrohydraulic, cable-bound
Mobile column lift HydroLift S3 4-7.5
4 x 7.5 t, electrohydraulic, cable-bound
Mobile column lift HydroLift S3 6-7.5
6 x 7.5 t, electrohydraulic, cable-bound
Mobile column lift HydroLift S3 8-7.5
8 x 7.5 t, electrohydraulic, cable-bound
Mobile column lift ArtisLift MRG-25-4
4 x 2.5 t, electromechanical, cable-bound, lift spindle, mobile, ideal for passenger car, transporter and mobile home