Trailer

Pit frame Type A

weight: 46 kg/m, a = 870 mm, per meter

Pit frame Type B

weight: 55Kg/m, a = 940 mm, per meter

Pit frame Type B

weight: 55 kg/m, a = 940 mm, per meter

Pit frame Type B1

weight: 42 kg/m, a = 940 mm, per meter

Pit frame Type B1

weight: 42 kg/m, a = 940 mm, per meter

Pit frame Type E

weight: 82 kg/m, a = 940 mm, per meter

Pit frame Type E

weight: 82 kg/m, a = 940 mm, per meter

Pit frame Type E1

weight: 69 kg/m, a = 940 mm, per meter

Pit frame Type E1

weight: 69 kg/m, a = 940 mm, per meter

Pit frame Type F

weight: 71.4 kg/m, a = 940 mm, per meter

Pit frame Type F

weight: 71.4 kg/m, a = 940 mm, per meter

Pit frame Type F1

weight: 62.5 kg/m, a = 940 mm, per meter, galvanised (both side)

Accessories heavy duty inground lifts

Pit frame Type F1

weight: 62.5 kg/m, a = 940 mm, per meter, primecoated (both side)

Segment pit covering

Segment Pit Covering

for monolithic constructed pits, per meter

Stand for the control cabine | 600 mm

1 piece

Accessories pit lifts

Surcharge for rail chassis with lateral flanged rollers (set consisting of 4 pieces)

Accessories heavy duty inground lifts

Transport trolley SmartCart XS | for Duplex load-carrying equipment

The convenient workshop helper with 33 slots – the attachments find their place in a tidy manner

Pad R

Support plate, rubber pad, round | load capacity 15 t, peg Ø 55 mm | 1 piece

Gearbox plates

Gearbox plate GA III

Adjustment angle +/- 40° / +/- 17°, load capacity 1 t, peg Ø 35 mm, measurements 400 x 300 mm (adjustable up to 600 x 400 mm), tensioning belt to secure the load

Gearbox plates

Gearbox plate GA IV

Adjustment angle +/- 12°, load capacity 1 t, peg Ø 35 mm, measurements 546 x 381 mm, in series galvanised, tensioning belts to secure the load, large rubber supporting surface

Pad X

Steel clamp | load capacity 20 t, peg Ø 55 mm | 1 piece

Prismatic blocks

For GA IV | 2 pieces

Spacer DS 2

30 t, peg Ø 55 mm, 150 mm | 1 piece

Axial traverse ATB NF

10 t, peg Ø 55 mm, adjustment range 420 – 1020 mm | suitable for low-level buses | incl. 2 sliders and 2 adjustable receptacle pins

Axial traverse ATEB S2

7.5/15 t, peg Ø 45/55 mm, adjustment range 200 – 620/830 – 1500 mm | special cross bar for secure seating of EvoBus buses, in particular the CITARO series | incl. 4 pads and 2 sliders

Bushing 55/35

Peg Ø 55 mm, standard peg Ø gearbox plates 35 mm | for BLITZlifts with mount Ø 55 mm | 1 piece

Bushing 55/45

Peg Ø 55 mm, standard peg Ø gearbox plates 45 mm | for BLITZlifts with mount Ø 55 mm | 1 piece

Bushing 80/35

Peg Ø 80 mm, standard peg Ø gearbox plates 35 mm | for BLITZlifts with mount Ø 80 mm | 1 piece

Bushing 80/45

Peg Ø 80 mm, standard peg Ø gearbox plates 45 mm | for BLITZlifts with mount Ø 80 mm | 1 piece

Pad H

Wooden clamp | load capacity 20 t, peg Ø 55 mm | 1 piece

Pad P

Support plate, pin | load capacity 15 t, peg Ø 35 mm | special support for buses on frame (mushroom shaped support) | 1 piece

Pad R

Support plate, rubber pad, round | load capacity 15 t, peg Ø 35 mm | 1 piece

Pad U

Support plate, fork | load capacity 15 t, peg Ø 55 mm | 1 piece

Spacer DS 1

30 t, peg Ø 55 mm, 100 mm | 1 piece

Spacer DS 1

15 t, peg Ø 35 mm, 100 mm | 1 piece

Spacer DS 2

30 t, peg Ø 80 mm, 150 mm | 1 piece

Spacer DS 2

15 t, peg Ø 35 mm, 150 mm | 1 piece

Spacer DS 3

30 t, peg Ø 80 mm, 250 mm | 1 piece

Spacer DS 3

30 t, peg Ø 55 mm, 250 mm | 1 piece

Spacer DS 3

15 t, peg Ø 35 mm, 250 mm | 1 piece

Spacer tube DR 4

30 t, peg Ø 80 mm, 400 mm | 1 piece

Spacer tube DR 4

10 t, peg Ø 35 mm, 400 mm | 1 piece

Spacer tube DR 4

15 – 20 t, peg Ø 55 mm, 400 mm | 1 piece

Spacer tube DR 5

10 t, peg Ø 35 mm, 500 mm | 1 piece

Spacer tube DR 5

15 – 30 t, peg Ø 55 mm, 500 mm | 1 piece

Spacer tube DR 6

30 t, peg Ø 80 mm, 600 mm | 1 piece

Spacer tube DR 6

10 t, peg Ø 35 mm, 600 mm | 1 piece

Support platform

15 t, mobile | for use in conjunction with U-brackets, primed and lacquered, lowered under load

Supporting block DB

Wooden block, 100 x 200 x 360 mm, load capacity 15 t | for lowering the traverse onto the supporting bridge | 1 piece

Supporting bridge GS 15

15 t | Universal | to ensure that the vehicle is tilt-proof – pit lift can still be used | incl. roller set, 2 sliders, 2 spacer tubes, 2 pads, traverses and tool tray

Supporting bridge GSB

15 t | super flat, accessible for low-floor buses | incl. roller set, 2 sliders, 2 spacer tubes and 2 pads

Supporting bridge GSB Vario

15 t | super flat, accessible for low-floor buses | incl. roller set, 2 sliders, 2 spacer tubes and 2 pads

Supporting bridge GSV

15 t, adjustable 900 – 1180 mm | pit lift can still be used | incl. roller set, 2 sliders, 2 spacer tubes, 2 pads and tool tray

Supporting Package I

15 t, peg Ø 55 mm, movable | minimum equipment of a working pit | incl. supporting bridge GS, traverse ATS, 2 spacers and connecting set

Supporting Package II

15 t, peg Ø 55 mm, movable | basic equipment for lorry workshops with universal vehicle access | incl. 2 supporting bridges GS, 2 traverses (ATS, ATK), 2 spacers, connecting set and 2 spacer tubes

Supporting Package III

15 t, peg Ø 55 mm, movable | for bus and transport companies (low-floor buses) | incl. supporting bridge GSB, traverse ATB, 3 pads and 2 wooden blocks

15 t, peg Ø 55 mm, movable | for repair shops with universal vehicle access – specialising in trucks, Unimogs, construction and specialised vehicles | incl. 3 traverses (ATK, ATS, ATB), 3 supporting bridges GS, 2 wooden blocks, 5 pads, 2 spacer tubes and 8 spacers