Passenger cars
Showing 199–297 of 591 results
Supporting bridge GS 30
30 t | Universal | to ensure that the vehicle is tilt-proof – pit lift can still be used | incl. roller set, 2 sliders, 2 spacer tubes, 2 pads, traverses and tool tray
Supporting bridge GSB
10 t | super flat, accessible for low-floor buses | incl. roller set, 2 sliders, 2 spacer tubes and 2 pads
Supporting Package I
20 t, peg Ø 80 mm, navigable
Supporting Package I
20 t, peg Ø 55 mm, navigable
Supporting Package I
10 t, peg Ø 55 mm, navigable
Supporting Package II
20 t, peg Ø 80 mm, navigable
Supporting Package II
20 t, peg Ø 55 mm. navigable
Supporting Package II
11 t, peg Ø 55 mm, navigable
Supporting Package III
10 t, peg Ø 55 mm, navigable
Supporting Package IV
20 t, peg Ø 80 mm, navigable
Supporting Package IV
20 t, peg Ø 55 mm, navigable
Supporting Package IV
10 t, peg Ø 55 mm, navigable
Traverse ATB
10 t, peg Ø 55 mm
Traverse ATB N
10 t, peg Ø 55 mm
Traverse ATK
30 t, peg Ø 80 mm
Traverse ATK
20 t, peg Ø 55 mm | front axle fork, incl. 2 pads
Traverse ATS
20 t, peg Ø 55 mm
Traverse ATS
10 t, peg Ø 55 mm
Traverse set ATB | 10 t
10 t, peg Ø 35 mm | accessory set for supporting trucks | incl. 2 sliders, 2 pads and 2 spacers
Spacers for pads for electromechanical lifts
4 x 89 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | 1 set / 8 pieces
2-post lift SPM42-XEL
4.2 t, electromechanical, symmetrical, double control panel, 4 x 3-stage arms, TEq-Link, energy kit
Diagnostic kit STDADIAG
IDC5 KIT TEXA – for diagnostic wheel alignment | kit for those who have a wheel alignment but no TEXA accessories
Diagnostic kit STDADIAG/SW
TEXA IDC5 SW KIT – for diagnostic wheel alignment | kit for those who already have TEXA devices (e.g., ADAS RCSS)
Supporting bridge SPZ-15
Axial traverse ATEB S2
7.5 – 15 t, peg Ø 45 mm
Pad H
Wooden clamp | load capacity 20 t, peg Ø 80 mm | 1 piece
Pad U
Support plate, fork | load capacity 15 t, peg Ø 35 mm | 1 piece
Pad X
Steel clamp | load capacity 30 t, peg Ø 80 mm | 1 piece
Pad X
Steel clamp | load capacity 15 t, peg Ø 35 mm | 1 piece
Supporting Package I
30 t, peg Ø 80 mm, navigable
Supporting Package II
30 t, peg Ø 80 mm, navigable
Supporting Package IV
30 t, peg Ø 80 mm, navigable
Traverse ATS
30 t, peg Ø 80 mm
Traverse ATS
20 t, peg Ø 80 mm
Traverse for HydroLift S3 7,5/8,2
16.4 t
Traverse for HydroLift S3 7,5/8,2
Max. load bearing capacity 16.4 t, king pin support | only in conjunction with traverse (item no. 119777)
Crossbar height adjustment
Kit for increasing overhead cable passage height by up to +1.5 m | for spindle lifts | 1 set
Inground cable connection kit
Allows columns connection cables to be placed inground | 1 piece
Wheel clamps Fast clamps
Quick-clamps | for CCD wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, clamps weight 3.8 kg (per set) | 1 set / 2 pieces
Eyebolt
3.5 t – 4.2 t | facilitates installation of the lift, can be used again for other installations | 1 set
2-post lift SPM42-XL
4.2 t, electromechanical, symmetrical, 4 x 3-stage arms, TEq-Link
2-post lift SPM42-XL
4.2 t, electromechanical, symmetrical, 4 x 3-stage arms, TEq-Link
Wheel clamps Fast clamps
Quick-clamps | for 3D wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, clamps weight 3.5 kg (per set) | 1 set / 2 pieces
Pads
Support plate, rubber pad, adjustable – for quick-positioning on 4 heights | 4-stage | 1 set / 4 pieces
Support plates
3.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Support plates
3.2 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Traverse for HydroLift 6,2
12.4 t
Traverse for HydroLift 6,2
Max. load bearing capacity 12.4 t, king pin support | only in conjunction with traverse (item no. 120204)
Spacers for pads
4 x 90 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | Only for AV arms | 1 set / 8 pieces
Bus traverse BEFV-15
Wide, extended version with extendable sliding pieces, extra flat, adjustment range 870 – 1200 mm (510 – 840 mm), load capacity 15 t (center) | 1 piece
Lowered traverse
Can travel along the whole adjusting range at floor level
Lowered traverse
In defined position, fitted at floor level
Pad A 120
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 120 mm | with handles | 1 piece
Pad A 50
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 50 mm | 1 piece
Pad A 60
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 60 mm | 1 piece
Pad E 140/100
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | 1 piece
Pad E 190/230
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | for traverse TEF 107445 | 1 piece
Pad E 270/230
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | for traverse TEFV 11132 | 1 piece
Pad G 145/150
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
Pad G 185/150
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
Pad G 220/110
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
Pad G 260/190
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
Pad G 30/80
Supporting fork | load capacity 15 t, peg Ø 75 mm | 1 piece
Pad G 40/150
Supporting fork, standard | load capacity 15 t, peg Ø 75 mm | 1 piece
Pad G 40/90
Supporting fork | load capacity 15 t, peg Ø 75 mm | for supporting low-floor buses (MAN and DB CITARO) at the front axle | 1 piece
Pad G 50/60
Supporting fork | load capacity 15 t, peg Ø 75 mm | 1 piece
Pad R 116
Support plate, rubber pad, round | load capacity 15 t, peg Ø 75 mm, Ø 116 mm | 1 piece
Pad R 150
Support plate, rubber pad, round | load capacity 15 t, peg Ø 75 mm, Ø 150 mm | 1 piece
Spacer D 100
15 t, peg Ø 75 mm, 100 mm | 1 piece
Spacer D 200
15 t, peg Ø 75 mm, 200 mm | 1 piece
Spacer D 60
15 t, peg Ø 75 mm, 60 mm | 1 piece
Transport trolley for traverse TS
Traverse set TP
Especially suitable for the reception of downhill tracks
Traverse T
Traverse TA
Traverse TS
2180 x 203 mm | special traverse complete
Trolley SmartCart
for DUPLEX load-carrying equipment, incl. 4 swiveling rollers
Truck traverse TEF-15 | Universal
1 piece, 1-fold telescopic, adjustment range 710 – 1040 mm (510 – 840 mm), load capacity 15 t (center)
Truck traverse TTS-15 | Double extension
15 t (center), 2-fold telescopic, adjustment range 880 – 1500 mm (520 – 1140 mm)
Aggregate support Universal | for W221, W164, W209, R171
Weight 20 kg, load capacity 800 kg
Support plates
4 / 4.2 / 4.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Universal support Ø 35 mm
Mounting hole Ø 35 mm, suitable for holding various tools, such as the transmission plate GA passenger car | fitted with a bushing
Cross-beam for ArtisLift MRG55
15 t
Floor stand
1000 mm wide (for T/L-5 platform)
Floor stand
800 mm wide (for T/L-4 platform)
Retrofit kit Fast clamps
CCD kit for 3D Quick-clamps (VSG.FC167.701916 to VSG.FC169.701923) | 1 set / 2 pieces
Accessories holder for Portal Lift
6 slots, attached to lifting unit
Adaption for motor lifting device R251
only in connection with basic unit M30
Adaption M30-1
for C-Class (BR203), S-Class (BR220/W215), M-Class with 4-cyl. engine
Adaption SL01
for SL (R230)
Eyebolt
5.5 t | facilitates the handling and installation of the lift, reusable for multiple installations | 1 set
Load regulator passenger car
For balancing the engine during dismounting, capacity 0.5 t
Pad
Steel clamp | load capacity 17 t | 1 piece
Support plate mount
1 included in the scope of delivery, 1 more recommended if the distance between the mounting points is less than 550 mm
Support plates
5.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Water drain/filter combination for Portal Lift 17 Vario
Water separator, fitted in factory | to protect the control system and pump from harmful condensation | max. operating pressure 16 bar
2-post lift SPM55-XEL
5.5 t, electromechanical, symmetrical posts, asymmetrical support arms, double control panel, 4 long arms, 4-stage front arms, TEq-Link, energy kit
4-post lift SM40-47
4.0 t, electrohydraulic, track length 4700 mm, wheel alignment optional
4-post lift SM40LT-47
4.0 t, electrohydraulic, with wheel-free jack, track length 4700 mm, wheel alignment optional