Motor homes
Showing 1–99 of 581 results
Calibration fee (net) for all tyre gauges Pneutruck
Cassette extended (primary coated)
Incl. galvanized slide covering, per meter
Frame extended (primary copated)
Incl. galvanised slide covering, per meter
Frame with overhang
galvanised execution, incl. galvanised slide covering, each piece
Frame with overhang
incl. galvanised slide covering, each piece
Jacking beam
13.5 t, hand pump
Nuts wear check-tool
Pit expansion BusStop
Abstract segment
Pit frame Type A
weight: 46 kg/m, a = 870 mm, per meter
Pit frame Type A
weight: 46 kg/m, a = 870 mm, per meter
Pit frame Type B
weight: 55Kg/m, a = 940 mm, per meter
Pit frame Type B
weight: 55 kg/m, a = 940 mm, per meter
Pit frame Type B1
weight: 42 kg/m, a = 940 mm, per meter
Pit frame Type B1
weight: 42 kg/m, a = 940 mm, per meter
Pit frame Type E
weight: 82 kg/m, a = 940 mm, per meter
Pit frame Type E
weight: 82 kg/m, a = 940 mm, per meter
Pit frame Type E1
weight: 69 kg/m, a = 940 mm, per meter
Pit frame Type E1
weight: 69 kg/m, a = 940 mm, per meter
Pit frame Type F
weight: 71.4 kg/m, a = 940 mm, per meter
Pit frame Type F
weight: 71.4 kg/m, a = 940 mm, per meter
Pit frame Type F1
weight: 62.5 kg/m, a = 940 mm, per meter, galvanised (both side)
Pit frame Type F1
weight: 62.5 kg/m, a = 940 mm, per meter, primecoated (both side)
Segment Pit Covering
for monolithic constructed pits, per meter
Stand for the control cabine | 600 mm
1 piece
Surcharge for rail chassis with lateral flanged rollers (set consisting of 4 pieces)
Surcharge rollers with special profile
Tension belt gauge
Transport trolley SmartCart XS | for Duplex load-carrying equipment
The convenient workshop helper with 33 slots – the attachments find their place in a tidy manner
2-post lift SPO55E-EH1GR
5.5 t, electrohydraulic, 3-section support arms, symmetrical, double control panel, height 4475 mm
2-post lift SPO55E-EH2GR
5.5 t, electrohydraulic, 3-section support arms, symmetrical, double control panel, height 4780 mm
2-post lift SPO55E-EH4GR
5.5 t, electrohydraulic, 3-section support arms, symmetrical, double control panel, height 5432 mm
2-post lift SPO55E-GR
5.5 t, electrohydraulic, 3-section support arms, symmetrical, double control panel, height 4170 mm
2-post lift SPO65E-LWB
6.5 t, electrohydraulic, double control panel, support arms 4 x 3-sections, asymmetrical, total height 5028 mm
2-post lift SPO65E-EH2-LWB
6.5 t, electrohydraulic, double control panel, support arms 4 x 3-sections, asymmetrical, total height 5432 mm
2-post lift SPMA35-X
3.5 t, electromechanical, rotated columns at 45°, asymmetrical, 2-stage long arms, 3-stage short arms, TEq-Link
2-post lift SPMA35-X
3.5 t, electromechanical, rotated columns at 45°, asymmetrical, 2-stage long arms, 3-stage short arms, TEq-Link
2-post lift SPMA35-XE
3.5 t, electromechanical, rotated columns at 45°, double control panel, 2-stage long arms, 3-stage short arms, asymmetrical, TEq-Link, energy kit
Pads frame adapters kit
Pads frame adapters kit Ø 120 mm (1 set, 2 pcs), for turntable
Spacers for pads
4 x 200 mm, incl. bracket for mounting on the pillars | 1 set / 4 pieces
Pads
Support plate, rubber pad, rectangular | for Tesla | 1 set / 4 pieces
Mounting set for traverse ATT 3,2 C
Optional accessories for the transporter receptacle, recommended plug-in pick-up set | for cars / vans / MAN / Crafter / Sprinter
Stands for alignment
1 set / 4 pieces
Vehicles lift platforms
Ramp height 60 mm, for extremely low vehicles | 1 set / 2 pieces
Tool trays
Magnetic | 1 set / 2 pieces
Tool support
Ergonomic holder for impact wrench
Pad R
Support plate, rubber pad, round | load capacity 15 t, peg Ø 55 mm | 1 piece
Pads
Prism | for Mercedes G-Class – front and rear | 1 set / 4 pieces
Pads
Support plate, centering mushroom | for Fiat 500E, 500 ABARTH | 2-stage | 1 set / 4 pieces
Pads
Prism, mandrel | for Mercedes Sprinter, VW Crafter | 1 set / 6 pieces
Axial traverse ATH
1.5 t, peg Ø 35 mm, adjustment range 550 – 1200 mm, 1-fold telescopic | incl. 2 pads and 2 spacers
Axial traverse ATT 3,2
3.2 t, peg Ø 35 mm, adjustment range 630 – 1230 mm, 2-fold telescopic, incl. carrying plates | safe 2-point-support of vehicles such as Mercedes-Benz Sprinter, VW – LT 2
Axial traverse ATT 3.2 C
3.2 t, peg Ø 55 mm, adjustment range 868 – 1660 mm, 2-fold telescopic | for passenger cars and vans | incl. pad
Gearbox plate GA III
Adjustment angle +/- 40° / +/- 17°, load capacity 1 t, peg Ø 35 mm, measurements 400 x 300 mm (adjustable up to 600 x 400 mm), tensioning belt to secure the load
Gearbox plate GA IV
Adjustment angle +/- 12°, load capacity 1 t, peg Ø 35 mm, measurements 546 x 381 mm, in series galvanised, tensioning belts to secure the load, large rubber supporting surface
Pad X
Steel clamp | load capacity 20 t, peg Ø 55 mm | 1 piece
Pads
Mandrel | for Fiat Ducato, Peugeot Boxer, Citroën Jumper – front and rear | 1 set / 4 pieces
Pads
Prism | for VW MEB platform E-vehicles | 1 set / 4 piece
Pads
Support plate, U-support | 1 set / 4 pieces
Prismatic blocks
For GA IV | 2 pieces
Spacer DS 2
30 t, peg Ø 55 mm, 150 mm | 1 piece
Axial traverse ATB NF
10 t, peg Ø 55 mm, adjustment range 420 – 1020 mm | suitable for low-level buses | incl. 2 sliders and 2 adjustable receptacle pins
Axial traverse ATEB S2
7.5/15 t, peg Ø 45/55 mm, adjustment range 200 – 620/830 – 1500 mm | special cross bar for secure seating of EvoBus buses, in particular the CITARO series | incl. 4 pads and 2 sliders
Bushing 55/35
Peg Ø 55 mm, standard peg Ø gearbox plates 35 mm | for BLITZlifts with mount Ø 55 mm | 1 piece
Bushing 55/45
Peg Ø 55 mm, standard peg Ø gearbox plates 45 mm | for BLITZlifts with mount Ø 55 mm | 1 piece
Bushing 80/35
Peg Ø 80 mm, standard peg Ø gearbox plates 35 mm | for BLITZlifts with mount Ø 80 mm | 1 piece
Bushing 80/45
Peg Ø 80 mm, standard peg Ø gearbox plates 45 mm | for BLITZlifts with mount Ø 80 mm | 1 piece
Connecting pieces ZS 100
1.5 t, 100 mm | 1 set / 2 pieces
Connecting pieces ZS 50
1.5 t, 50 mm | 1 set / 2 pieces
Energy kit
Pneumatic power set with compressed air supply and condensate separator, incl. 2 additional compressed air connections and 1 air hose | peg Ø 35 mm, max. operating pressure 16 bar | for all lifters with an air motor – particularly recommended for Blitz S15 Vario
Fastening set ATT 3,2
10 t, peg Ø 35 mm | for secure placement of an axial traverse ATT 3,2 on the supporting bridge GS / GSB
Pad H
Wooden clamp | load capacity 20 t, peg Ø 55 mm | 1 piece
Pad P
Support plate, pin | load capacity 15 t, peg Ø 35 mm | special support for buses on frame (mushroom shaped support) | 1 piece
Pad R
Support plate, rubber pad, round | load capacity 15 t, peg Ø 35 mm | 1 piece
Pad U
Support plate, fork | load capacity 15 t, peg Ø 55 mm | 1 piece
Spacer DS 1
30 t, peg Ø 55 mm, 100 mm | 1 piece
Spacer DS 1
15 t, peg Ø 35 mm, 100 mm | 1 piece
Spacer DS 2
30 t, peg Ø 80 mm, 150 mm | 1 piece
Spacer DS 2
15 t, peg Ø 35 mm, 150 mm | 1 piece
Spacer DS 3
30 t, peg Ø 80 mm, 250 mm | 1 piece
Spacer DS 3
30 t, peg Ø 55 mm, 250 mm | 1 piece
Spacer DS 3
15 t, peg Ø 35 mm, 250 mm | 1 piece
Spacer tube DR 4
30 t, peg Ø 80 mm, 400 mm | 1 piece
Spacer tube DR 4
10 t, peg Ø 35 mm, 400 mm | 1 piece
Spacer tube DR 4
15 – 20 t, peg Ø 55 mm, 400 mm | 1 piece
Spacer tube DR 5
10 t, peg Ø 35 mm, 500 mm | 1 piece
Spacer tube DR 5
15 – 30 t, peg Ø 55 mm, 500 mm | 1 piece
Spacer tube DR 6
30 t, peg Ø 80 mm, 600 mm | 1 piece
Spacer tube DR 6
10 t, peg Ø 35 mm, 600 mm | 1 piece
Support platform
15 t, mobile | for use in conjunction with U-brackets, primed and lacquered, lowered under load
Supporting block DB
Wooden block, 100 x 200 x 360 mm, load capacity 15 t | for lowering the traverse onto the supporting bridge | 1 piece
Supporting bridge GS 15
15 t | Universal | to ensure that the vehicle is tilt-proof – pit lift can still be used | incl. roller set, 2 sliders, 2 spacer tubes, 2 pads, traverses and tool tray
Supporting bridge GSB
15 t | super flat, accessible for low-floor buses | incl. roller set, 2 sliders, 2 spacer tubes and 2 pads
Supporting bridge GSB Vario
15 t | super flat, accessible for low-floor buses | incl. roller set, 2 sliders, 2 spacer tubes and 2 pads
Supporting bridge GSV
15 t, adjustable 900 – 1180 mm | pit lift can still be used | incl. roller set, 2 sliders, 2 spacer tubes, 2 pads and tool tray
Supporting Package I
15 t, peg Ø 55 mm, movable | minimum equipment of a working pit | incl. supporting bridge GS, traverse ATS, 2 spacers and connecting set
Supporting Package II
15 t, peg Ø 55 mm, movable | basic equipment for lorry workshops with universal vehicle access | incl. 2 supporting bridges GS, 2 traverses (ATS, ATK), 2 spacers, connecting set and 2 spacer tubes
Supporting Package III
15 t, peg Ø 55 mm, movable | for bus and transport companies (low-floor buses) | incl. supporting bridge GSB, traverse ATB, 3 pads and 2 wooden blocks
Supporting Package IV
15 t, peg Ø 55 mm, movable | for repair shops with universal vehicle access – specialising in trucks, Unimogs, construction and specialised vehicles | incl. 3 traverses (ATK, ATS, ATB), 3 supporting bridges GS, 2 wooden blocks, 5 pads, 2 spacer tubes and 8 spacers
Traverse ATB
15 t, peg Ø 55 mm | standard traverse for buses, incl. 2 sliders and 4 pads