Light commercial
Showing 199–297 of 690 results
LED lighting kit for Exa Lift HDVL | 6-way
6-way | for HDVL lifts with 8, 9 or 10 m platform length | suitable for washing bay, mounted on the inside of the rails
LED lighting kit for Exa Lift HDVL | 8-way
8-way | for HDVL lifts with 11, 12, 13 or 14,5 m platform length | suitable for washing bay, mounted on the inside of the rails
Synchronization control Twin | for Exa Lift HDVL
2 lifts synchronised or individually movable | incl. 2 separate control boxes with controls and cable with plug
Support trestle
10000 kg, 1235 – 2040 mm, height adjustable in 6 x 100 mm steps, additionally with infinitely adjustable upper part (115 mm), 2 rollers, U-shaped holder and prismatic holder (interchangeable) | Grey (RAL 7040)
Support trestle
10000 kg, 1235 – 2040 mm, height adjustable in 6 x 100 mm steps, additionally with infinitely adjustable upper part (115 mm), 3 springy wheels, U-shaped holder and prismatic holder (interchangeable), ready assembled | Grey (RAL 7040)
2-post lift SPM42-XEL
4.2 t, electromechanical, symmetrical, double control panel, 4 x 3-stage arms, TEq-Link, energy kit
Front and rear adapters for HydroLift
16.4 t | for lifting various tractors, incl. various agricultural adapters
Support trestle
7500 kg, 1330 – 2030 mm, height adjustable in 7 x 100 mm steps, 2 castors, U-bracket | Grey (RAL 7040)
LED lighting kit Standard | for HydroLift 6,2/7,5/8,2
Incl. cable set, bracket and installation instructions | 2 pieces
Cable suspension
For electric or compressed air cables, especially suitable for installation in pits with overhang | sold by the meter, installation by the customer
Diagnostic kit STDADIAG
IDC5 KIT TEXA – for diagnostic wheel alignment | kit for those who have a wheel alignment but no TEXA accessories
Diagnostic kit STDADIAG/SW
TEXA IDC5 SW KIT – for diagnostic wheel alignment | kit for those who already have TEXA devices (e.g., ADAS RCSS)
Supporting bridge SPZ-15
Axial traverse ATEB S2
7.5 – 15 t, peg Ø 45 mm
Drive-on ramp kit for ExaLift HDVL | 3300 mm | lacquered
3300 mm, lacquered version | ideal for low-floor vehicles, dowel to the floor (fixing material not included) | for ExaLift HDVL | 1 set / 2 pieces
Pad H
Wooden clamp | load capacity 20 t, peg Ø 80 mm | 1 piece
Pad U
Support plate, fork | load capacity 15 t, peg Ø 35 mm | 1 piece
Pad X
Steel clamp | load capacity 30 t, peg Ø 80 mm | 1 piece
Pad X
Steel clamp | load capacity 15 t, peg Ø 35 mm | 1 piece
Supporting Package I
30 t, peg Ø 80 mm, navigable
Supporting Package II
30 t, peg Ø 80 mm, navigable
Supporting Package IV
30 t, peg Ø 80 mm, navigable
Traverse ATS
30 t, peg Ø 80 mm
Traverse ATS
20 t, peg Ø 80 mm
Drive-on ramp kit for ExaLift HDVL | 2510 mm | galvanized
2510 mm, hot galvanized version | ideal for low-floor vehicles, dowel to the floor (fixing material not included) | for ExaLift HDVL | 1 set / 2 pieces
Drive-on ramp kit for ExaLift HDVL | 3300 mm | galvanized
3300 mm, hot galvanized version | ideal for low-floor vehicles, dowel to the floor (fixing material not included) | for ExaLift HDVL | 1 set / 2 pieces
Traverse for HydroLift S3 7,5/8,2
16.4 t
Traverse for HydroLift S3 7,5/8,2
Max. load bearing capacity 16.4 t, king pin support | only in conjunction with traverse (item no. 119777)
Crossbar height adjustment
Kit for increasing overhead cable passage height by up to +1.5 m | for spindle lifts | 1 set
Inground cable connection kit
Allows columns connection cables to be placed inground | 1 piece
Wheel clamps Fast clamps
Quick-clamps | for CCD wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, clamps weight 3.8 kg (per set) | 1 set / 2 pieces
Eyebolt
3.5 t – 4.2 t | facilitates installation of the lift, can be used again for other installations | 1 set
2-post lift SPM42-XL
4.2 t, electromechanical, symmetrical, 4 x 3-stage arms, TEq-Link
2-post lift SPM42-XL
4.2 t, electromechanical, symmetrical, 4 x 3-stage arms, TEq-Link
Wheel clamps Fast clamps
Quick-clamps | for 3D wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, clamps weight 3.5 kg (per set) | 1 set / 2 pieces
Pads
Support plate, rubber pad, adjustable – for quick-positioning on 4 heights | 4-stage | 1 set / 4 pieces
Protection cover for HydroLift 6,2/7,5
Flexible, sturdy protective cover with magnets to prevent splashing water | Only for battery-powered wheel grippers | 1 piece
Support plates
3.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Support plates
3.2 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Traverse for HydroLift 6,2
12.4 t
Traverse for HydroLift 6,2
Max. load bearing capacity 12.4 t, king pin support | only in conjunction with traverse (item no. 120204)
Protection cover for HydroLift 8,2
Flexible, sturdy protective cover with magnets to prevent splashing water | Only for battery-powered wheel grippers | 1 piece
Spacers for pads
4 x 90 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | Only for AV arms | 1 set / 8 pieces
Adjustable drive
Additional adjustable drive to mobilise the fixed lifting unit, incl. extended hanging control pad, reversing device, chain and cover
Automatic ”run-into” protection
Mount for automatic ”run-into” protection according to requirements
Automatic ”run-into” protection
Position indicator for craneway
Automatic ”run-into” protection
Light barrier max.15 m
Automatic axle distance preselection
AAV-Control
Bus traverse BEFV-15
Wide, extended version with extendable sliding pieces, extra flat, adjustment range 870 – 1200 mm (510 – 840 mm), load capacity 15 t (center) | 1 piece
Cable suspension
Mount for running rail according to requirements
Cable suspension
Balancer to disconnect hand-held control panel
Lowered traverse
Can travel along the whole adjusting range at floor level
Lowered traverse
In defined position, fitted at floor level
Pad A 120
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 120 mm | with handles | 1 piece
Pad A 50
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 50 mm | 1 piece
Pad A 60
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 60 mm | 1 piece
Pad E 140/100
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | 1 piece
Pad E 190/230
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | for traverse TEF 107445 | 1 piece
Pad E 270/230
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | for traverse TEFV 11132 | 1 piece
Pad G 145/150
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
Pad G 185/150
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
Pad G 220/110
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
Pad G 260/190
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
Pad G 30/80
Supporting fork | load capacity 15 t, peg Ø 75 mm | 1 piece
Pad G 40/150
Supporting fork, standard | load capacity 15 t, peg Ø 75 mm | 1 piece
Pad G 40/90
Supporting fork | load capacity 15 t, peg Ø 75 mm | for supporting low-floor buses (MAN and DB CITARO) at the front axle | 1 piece
Pad G 50/60
Supporting fork | load capacity 15 t, peg Ø 75 mm | 1 piece
Pad R 116
Support plate, rubber pad, round | load capacity 15 t, peg Ø 75 mm, Ø 116 mm | 1 piece
Pad R 150
Support plate, rubber pad, round | load capacity 15 t, peg Ø 75 mm, Ø 150 mm | 1 piece
Roll cover Flexcover
driveable with 5.0t wheel load, galvanized
Spacer D 100
15 t, peg Ø 75 mm, 100 mm | 1 piece
Spacer D 200
15 t, peg Ø 75 mm, 200 mm | 1 piece
Spacer D 60
15 t, peg Ø 75 mm, 60 mm | 1 piece
Temporary cover
Wooden slats to insert in frame, capacity: max. 100 kg/m², per meter
Transport trolley for traverse TS
Traverse set TP
Especially suitable for the reception of downhill tracks
Traverse T
Traverse TA
Traverse TS
2180 x 203 mm | special traverse complete
Trolley SmartCart
for DUPLEX load-carrying equipment, incl. 4 swiveling rollers
Truck traverse TEF-15 | Universal
1 piece, 1-fold telescopic, adjustment range 710 – 1040 mm (510 – 840 mm), load capacity 15 t (center)
Truck traverse TTS-15 | Double extension
15 t (center), 2-fold telescopic, adjustment range 880 – 1500 mm (520 – 1140 mm)
Aggregate assembly device V00-2
for Vito with V6 petrol engine)
Support plates
4 / 4.2 / 4.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Universal support Ø 35 mm
Mounting hole Ø 35 mm, suitable for holding various tools, such as the transmission plate GA passenger car | fitted with a bushing
Floor leveling for HDVL 25/35-130/145-I
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 13/14,5 m platform length
Floor leveling for HDVL 25/35-130/145-I | galvanized
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 13/14.5 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length | hot galvanized version
Cassette extended (primary coated)
Incl. FLEXCOVER, per meter
Cassette galvanized
Instead of primary coat, per meter
Cross-beam for ArtisLift MRG55
15 t
Frame extended (primary copated)
Incl. FLEXCOVER, per meter
Frame galvanized
Instead of primary coat, per meter
Frame with overhang
Frame, galvanised execution, incl. FLEXCOVER, each piece
Frame with overhang
Frame incl. FLEXCOVER, each piece
MRG-Kit for MRG-55
10 m power cable with CEE plug and 1 litre spindle oil | 1 set – only valid for ArtisLift MRG-55 with 4 lifting units, when expanding to a set of 6 or 8, 2 units must be ordered
Pump sump
for lift cassette
Wheel fork extension for ArtisLift MRG55
Length approx. 123 mm | load capacity is reduced to 5 t | 1 set (for 1 wheel gripper)
Wheel fork für ArtisLift MRG55
Adjustable, wheel Ø 500 – 1200 mm | factory assembled – cannot be retrofitted | 1 piece
Wheel fork reduction for mobile column lifts | tires Ø 800 – 700 mm
Reduction of the wheel fork for tires from Ø 800 mm to Ø 700 mm | 1 piece/per column