Accessories lifts
Accessories for workshop lifts can seriously make a difference. Our selection of accessories lifts includes kits, rubber pads, covers and much more.
Showing 496–594 of 642 results
Wheel alignment kit Premium
N-type, height 50 mm, consisting of filling plates and 2 shifting plates, without turntables | for 4-post lift SM40LT-47 | Grey (RAL 7015) | ramp extension EXRMP-SM40N recommended
Beams
for vans and off-road vehicles
Drive-on ramps 1350 mm, ground ramps
Floor installation kit for 600N series lifts with wheel-free jack | 1 set / 2 pieces
Drive-on ramps 1560 mm, suspended ramps
Floor installation kit for 600N series lifts with wheel-free jack | 1 set / 2 pieces
Drive-on ramps 1800 mm, ground ramps
Floor installation kit for 600N series lifts with wheel-free jack | 1 set / 2 pieces
Drive-on ramps 2000 mm, suspended ramps
Floor installation kit for 600N series lifts with wheel-free jack | 1 set / 2 pieces
Eyebolt
5.5 t | facilitates the handling and installation of the lift, reusable for multiple installations | 1 set
Floor leveling for HDVL 25-90-I / HDVL 35-90-I
Floor leveling for HDVL 2x-80-I
Inground kit SM40LT/N, with CE stop, with wheel alignment kit
4 short ramps, for SM40LT
Inground kit SM55LT51B-AK-V.-7040, with CE stop, with wheel alignment kit
4 short ramps, for SM55LT
MRG-Kit for MRG-25
10m power cable with plug and 1 liter spindle oil
Rubber pads
120 mm | suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N6.193964, RAV.650N5.193902, RAV.660N2.193360, RAV.650N5.193018, RAV.650N6.193025, RAV.640N5.193049, RAV.640N4.192998, RAV.640N3.192981, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 4 pieces
Rubber pads
20 mm | suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N6.193964, RAV.650N5.193902, RAV.660N2.193360, RAV.650N5.193018, RAV.650N6.193025, RAV.640N5.193049, RAV.640N4.192998, RAV.640N3.192981, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 4 pieces
Rubber pads
200 mm | suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N6.193964, RAV.650N5.193902, RAV.660N2.193360, RAV.650N5.193018, RAV.650N6.193025, RAV.640N5.193049, RAV.640N4.192998, RAV.640N3.192981, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 4 pieces
Rubber pads
40 mm | suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N6.193964, RAV.650N5.193902, RAV.660N2.193360, RAV.650N5.193018, RAV.650N6.193025, RAV.640N5.193049, RAV.640N4.192998, RAV.640N3.192981, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 4 pieces
Rubber pads
60 mm | suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N6.193964, RAV.660N2.193360, RAV.650N6.193025, RAV.640N5.193049 and RAV.640N4.192998 | 1 set / 4 pieces
Runway extensions set SM80, front, 225 mm
Runway extensions set front 225 mm, only in connection with above-ground lifting platform (1 set / 2 pieces)
Second control unit
For SPOA3TS-EH2-EV | 1 piece
Supporting bridge GS
Universal, capacity 10 t, with Rollerset
Supporting bridge GSB
Extra flat, capacity 10 t, with Rollerset
Supporting bridge VS
Connecting set, capacity 10 t
Supporting Package I
10 t, 55 mm peg diameter, navigable
Supporting Package II
11 t, 55 mm peg diameter, navigable
Supporting Package III
10 t, 55 mm peg diameter, navigable
Traverse ATB
10 t, 55 mm peg diameter
Traverse ATB Truck-Set
10 t, 35 mm peg diameter
Traverse ATH
Axle traverse telescopic
Traverse ATK
10 t, 55 mm peg diameter
Traverse ATS
10 t, 55 mm peg diameter
Traverse ATT 3,2
Axle traverse double telescopic
Traverse ATT 3.2 C
3.2 t, 55 mm peg diameter, 2x extendable
Traverse HydroLift S2 | 16.4 t
King pin support
Traverse ZS 100
1 set (2 pieces) intermediate pieces for high vehicle pick-up points, incl. rubber plate, to be placed on the support plate when plug-in extensions can no longer be positioned, suitable for all car crossbars. Heights 50mm or 100mm, load capacity 1.5 t
Traverse ZS 50
1 set (2 pieces) intermediate pieces for high vehicle pick-up points, incl. rubber plate, to be placed on the support plate when plug-in extensions can no longer be positioned, suitable for all car crossbars. Heights 50mm or 100mm, load capacity 1.5 t
Turntable covers for 650 mm platforms
Spacers to completely close turntable recess | suitable for RAV.650N2.193797, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N5.193902, RAV.650N5.193018, RAV.640N5.193049, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 2 pieces
Turntable Set SPO65
4 pieces
Wheel alignment kit Premium
Height 75 mm, consisting of filling plates and 4 shifting plates, without turntables | for 4-post lift SM55LT-51 | Grey (RAL 7015) | ramp extension EXRMP-SM40N recommended
Adjustable wheel fork für MRG-55
for MRG-55, tire diameter 500 – 1200 mm
Gearbox plates GA passenger car
Load capacity 400 kg, universally applicable for passenger cars, particularly suitable for automatic transmissions
Pads
Support plate, rubber pad, adjustable – for quick-positioning on 4 heights | 4-stage | 1 set / 4 pieces
Supporting Package IV
10 t, 55 mm peg diameter, navigable
Traverse HydroLift S2 | 12.4 t
King pin support
Traverse HydroLift Traverse
Capacity 12.4 t
Extension Kit for ramps
Jacking Beam 2.6 t
Capacity 2600 kg
Lowered traverse
In defined position, fitted at floor level
Lowered traverse
Can travel along the whole adjusting range at floor level
Pad ZF axles
Asymmetrical pad improves accessibility to the oil drain plugs of the AV132 and others
Spacer D 100
Height 100 mm
Spacer D 200
Height 200 mm
Spacer D 60
Height 60 mm
Standard acceptance G 145/150
Standard acceptance G 185/150
Standard acceptance G 220/110
Standard acceptance G 260/190
for rear axles with differential
Standard acceptance G 30/80
Standard acceptance G 40/150
Standard acceptance G 40/90
Standard acceptance G 50/60
Support plate A 120
Support plate A 50
Support plate A 60
Support plate E 140/100
Support plate E 190/230
Support plate E 270/230
Support plate R 116
Support plate R 150
Traverse ATB N
10 t, 55 mm peg diameter
Traverse ATEB
10 t, 55 mm peg diameter
Traverse T
Traverse TA
Traverse TP
Traverse TS special traverse cpl.
Traverse TS trolley
Jacking Beam 4.0 t
Capacity 4000 kg
Adapter spigot 55 to 35 mm | for traverse ATT 3,2 C / jack | 135 mm
Reduction from 55 to 35 mm, necessary when using the traverse ATT 3,2 C with 55 mm spigot on a jack (e.g. Junior Jack) with 35 mm mounting hole
Extension for traverse ATT 3,2 C | 127 mm
2 pieces
Extension for traverse ATT 3,2 C | 80 mm
2 pieces
Mounting set for buses
Scope of delivery: 2x spacer 60 mm 2x spacer 100 mm 2x mounting fork 40/160/30 2x supporting plate 140/100/16 with aluminum support 2x mounting spigot Ø 50/30
Mounting set Universal | for trucks and buses
Scope of delivery: 2x spacer 60 mm 2x spacer 100 mm 2x mounting fork 40/160/30 2x mounting fork 170/190/25 2x supporting plate 140/100/16 with aluminum support
Pads
Mandrel | for Mercedes Sprinter, VW Crafter – front / for SPO65 | 1 set / 2 pieces
Pads
Support plate, rubber pad, round | for SPO65 | 1 set / 4 pieces
Pads
Prism | for Mercedes Sprinter, VW Crafter – rear / for SPO65E | 1 set / 2 pieces
Power Kit 230 V
Receptacle for semitrailer on kingpin
Reducer
Ø 2.75″ to 2″, adapter for mounting accessories SPOA3T/SP040/SPO55 | for SPO65 | 1 piece
Run-up ramps
Additional ramps, 900 mm | 1 set
Support plate X
30 t, 80 mm peg diameter
Supporting bridge GS
Universal, capacity 30 t, with Rollerset
Supporting Package I
30 t, 80 mm peg diameter, navigable
Supporting Package II
30 t, 80 mm peg diameter, navigable
Supporting Package IV
30 t, 80 mm peg diameter, navigable
Threaded support plate to lift transporters with traverse ATT 3,2 C
2 pieces
Traverse ATK
30 t, 80 mm peg diameter
Traverse ATS
30 t, 80 mm peg diameter
Access ramps 3300 mm
(ideal for low-floor vehicles), 1 pair
Connection Kit VS ATT 3,2
For secure placement of an axle load ATT 3,2 on the support bridge GS / GSB
Floor leveling for HDVL 25/35-120-I | galvanized
(only useful with strip foundation version)