Accessories diagnostic
Turn tables, tablets, wheel clamps, calibration targets, and camera system calibration: they are just some of the Rotary diagnostic accessories available.
Showing 100–188 of 188 results
Security system for vehicle detection
Serial cable 20 m
20 m
Software licence Test Lane Connect
Remote display on a mobile device | to use with on smartphones/tablets
Spare batteries for 3D aligners | 1 set / 2 pieces
Support platforms with presence sensor | 1 set / 2 pieces
with presence sensor | 1 set / 2 pieces
Support set for wheel free
Tablet (Android) including magnetic holder
Turn tables STDA124 | supplied instead of standard version | 1 set / 2 pieces
Universal remote control Bluetooth
Upgrade kit for converting RT094MVBX speed test stand to 2,3,4 wheel
For car motorbike 2-3-4 wheels – brakes + speed
Upgrade kit for digital consolle to use with a tablet
Walk-over covers | no transitable
Wall bracket for analog repeater
for analog repeater
Wall panels for measuring heads
(2 pieces.) with USB charging plug, access point and tablet tray
Weights and support for car mode calibration kit SRT066
+ weights support for calibration of pedal pressure gauge SRT064BTH (not needed if car brake tester calibration kit SRT087 is available)
Wheel clamps 3-point | rim Ø 8 – 24″ | 1 set / 2 pieces
3-point clamps with quick locking arms
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 760 mm
3-point clamps with quick locking arms | with Quick-Lock | 1 set / 2 pieces
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm
Self-centering 3-point clamps with quick locking arms | 2 sets / 4 pieces
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm
Self-centering 3-point clamps with quick locking arms | 2 sets / 4 pieces
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm
Self-centering 3-point clamps with quick locking arms for WD and WS models | 2 sets / 4 pieces
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm
Self-centering 3-point clamps with quick locking arms | 1 set / 2 pieces
Wheel clamps 4-point | rim Ø 10 – 24″, tyre Ø 480 to 910 mm
Self-centering 4-point clamps with quick locking arms | with Quick-Lock | 1 set / 2 pieces
Software licence Aligner Connect
Remote display on a mobile device | to use with on smartphones/tablets
Brake pedal depressor
Steering wheel lock
Plastic steering wheel lock with non-slip rubber guards for steering wheel and seat
Wi-Fi antenna
Wheelalignment-On, Wi-fi USB flash drive included
Database query credit Shoot & Go 350
Credit package for consulting the online database via KBA (German Federal Bureau of Motor Vehicles and Drivers) query | 350 queries
Level and height gauge
Level and height gauge (option)
Access point kit to transmit to smartphones/tablets
WiFi access point | STDA141 required
Calibration tool Standard | for WS and WD series
Calibration kit, only for WS and WD series, replaces STDA14
Software licence
Remote display on a mobile device | to use with on smartphones/tablets
Diagnostic kit STDADIAG/SW
TEXA IDC5 SW KIT – Diagnostic setup for those who already have TEXA devices (e.g., ADAS RCSS)
Lift mounting brackets for 3D measurement transducer | 1 set / 2 pieces
Turn tables Premium, HD | Ø 360 mm
1 set / 2 pieces
Turn tables Standard | Ø 300 mm, capacity 1000 kg | 1 set / 2 pieces
Claws for VW to be used with clamps with quick locking arms | ABS
Special wheel clamp plastic fingers | 1 set / 8 pieces
Diagnostic kit STDADIAG
IDC5 KIT TEXA – for diagnostic wheel alignment | kit for those who have a wheel alignment but no TEXA accessories
Magnets for clamp support | 1 set
Claws ABS, conic
Wheel clamp plastic fingers for wheel clamps STDA46EU-48E-35E-95E | 1 set / 8 pieces
Claws ABS, flat profile
Wheel clamp plastic fingers for wheel clamps STDA46EU-48E-35E-95E | 1 set / 8 pieces
Claws ABS, small profile
Wheel clamp plastic fingers for wheel clamps STDA46EU-48E-35E-95E | 1 set / 8 pieces
Claws for low profile tyres | Metal
Wheel clamp steel fingers for 4- or 3-point wheel clamps | 1 set / 8 pieces
Emergency power supply cable
For one measuring head / for WS series | 1 piece
Goniometers for truck turntables STDA29L
Graduated scales for wheel aligner | 1 set / 2 pieces
Kit for clamp support
For 3D wheel aligners ROT3D2.0WALL | Grey (RAL 7016)
Sliding plates 1100 x 500 x 50 mm
1 set / 2 pieces
Sliding plates 1500 x 500 x 50 mm
1 set / 2 pieces
Sliding plates 300 x 225 x 35 mm
1 set / 2 pieces
Spacers 200 mm
Mid-size | for truck wheel clamps STDA92 | 1 set / 6 pieces
Turntables for trucks | 1 set / 2 pieces
Capacity 2 x 4500 kg
Wheel clamps Truck | 3-point | tyre Ø 890 – 1290 mm
Special truck clamps with quick-locking arms to prevent wheel compensation, clamping on rim flange | 1 set / 2 pieces
Wheel clamps Truck | 4-point | rim Ø 12 – 28″, tyre Ø min. 700 mm
Self-centering 4-point clamps truck with quick-locking arms, movable shaft | including long removable claws | 1 set / 2 pieces
Аварийных кабеля
Аварийное электроснабжение и передача данных | для серии Bluetooth | 1 комплект / 2 шт.
Adapters for 3-point clamps for CCD wheel alignment on 2-post lifts | -120 mm
Allows to lower the measuring heads positioning thus prevents interferences on the transmission by the 2-post lift arms | 1 set / 4 pieces
Brackets for board installation ADAS (AUTEL)
Accessory for wheel aligner
Brackets for board installation ADAS (VAS6430 VW)
Accessory for wheel aligner
Clamps with quick locking arms for Porsche rims | Tyre Ø from 380 to 810 mm | 1 pair
Including blocking groups and 2+ 2 adapters
Subframe for trailer measurement
Trolley for wheel clamps
Wall brackets for wheel holders | 4 pieces
Wall panels for wheel holders | 2 pieces
Wheel clamps 4-point | rim Ø 12 – 28″
Self-centering 4-point clamps | including removable claws | 1 set / 2 pieces
Wheel clamps for BMW, Mercedes rims | tyre Ø 480 – 915 mm
Special clamps with quick locking arms for wheel aligner | 1 set / 2 pieces
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm
Self-centering 3-point clamps with quick locking arms | 1 set / 2 pieces
Grabber arms
For STDA35E-95E and locking groups STDA38 | long size| tyre-Ø 860 – 1115 mm | 1 set / 4 pieces
Grabber arms
For STDA35E-95E and locking groups STDA38 | medium size | tyre-Ø 680 – 910 mm | 1 set / 4 pieces
Token (password) KBA query
For consulting database on-line via query of German Federal Bureau of Motor Vehicles and Drivers (KBA) | includes 200 credits
Quick-locking arms for upgrading 4-point wheel clamps STDA30E | tyre Ø 780 – 1220 mm
To upgrade 4-point truck clamps STDA30E to STDA48E | including metal fingers | 1 set / 2 pieces
Quick-locking arms for upgrading 4-point wheel clamps STDA33EU-34E | tyre Ø 480 – 760 mm | 2 sets / 4 pieces
To upgrade wheel clamps STDA33EU-34E to STDA46EU-35E | allows to avoid run out compensation | including ABS fingers
Wheel clamps Truck | 4-point | rim Ø 12 – 28″, tyre Ø 780 – 1220 mm
4-point truck self-centering clamps with quick-locking arms, movable shaft | including metal grabbing armser | 1 set / 2 pieces
Spirit levels for targets | 1 set / 4 pieces
Token (password) for additional functions
Wheel clamps Fast clamps
Quick-clamps | for CCD wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, max. wheel weight 3.8 kg | 1 set / 2 pieces
Vehicle data bank
Quick locking arms for upgrading 4-point wheel clamps STDA33EU-34E | tyre Ø 480 – 760 mm | 1 set / 2 pieces
To upgrade wheel clamps STDA33EU-34E to STDA46EU-35E | allows to avoid run out compensation | including ABS fingers
Turn tables Standard | Ø 300 mm | 1 set / 2 pieces
Spare batteries for 3D aligners | 1 set / 2 pieces
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm
Self-centering 3-point clamps with quick locking arms, without compensation | 1 set / 2 pieces
Extra batteries | 1 set / 2 pieces
Passenger car wheel alignment kit STDA159
Kit for converting truck aligner 6CCD into a vehicle aligner
Wheel clamps 4-point | rim Ø 10 – 24″
Self-centering 4-point clamps | including removable claws | 1 set / 2 pieces
Wheel clamps Fast clamps
Quick-clamps | for 3D wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, max. wheel weight 3.5 kg | 1 set / 2 pieces
Claws for vans | Metall, long
Wheel clamp metal fingers for wheel clamps STDA30E-48E (standard) and STDA33EU-46EU-34E-35E-95E | 1 set / 8 pieces
Seat for turn tables for heavy duty trucks
Turntables and sliding plates not included!
Turn tables mechanical | for passenger cars
Accessory for wheel aligner | 1 set / 2 pieces
„Shoot & Go“ online database (option)
Online database via query of German Federal Bureau of Motor Vehicles and Drivers (KBA)
„Shoot & Go“ online database (option)
Online database via query of German Federal Bureau of Motor Vehicles and Drivers (KBA)
Database update 2 years | free
Quick check bracket
Quick check bracket for mobile use (option)