Motor homes
Showing 1–99 of 197 results
Floor leveling for HDVL 25-90-I / HDVL 35-90-I
Floor leveling for HDVL 2x-80-I
Jacking beam KP118PY
13.5 t, air-hydraulic
Warning light
Light signal “system in use”
2-post lift KPX35
3.5 t, electromechanical, asymmetrical, rotated columns at 45°, 2-stage long arms, 3-stage short arms, TEq-Link
2-Post lift KPX42
4.2 t, electromechanical, symmetrical posts, asymmetrical support arms, 2-stage long arms, 3-stage short arms, TEq-Link
2-Post lift KPX42E
4.2 t, electromechanical, symmetrical posts, asymmetrical support arms, 2-stage long arms, 3-stage short arms, TEq-Link, energy kit
2-Post lift KPX42LIK
4.2 t, electromechanical, symmetrical, 4 x 3-stage arms, TEq-Link
2-Post lift KPX42ELIK
4.2 t, electromechanical, symmetrical, push button operation on both sides, 4 x 3-stage arms, TEq-Link, energy kit
2-post lift KPX55LIKTA
5.5 t, electromechanical, symmetrical, 2-stage long arms, 4 long arms, 4-stage front arms, double control panel, with TEq-Link and Energy kit
2-post lift KPX55ELIKTA
5.5 t, electromechanical, symmetrical posts, asymmetrical support arms, double control panel, 4 long arms, 4-stage front arms, TEq-Link, energy kit
2-post lift KPH350.45
4.5 t, electrohydraulic, baseless, symmetrical posts, asymmetrical support arms | 3 x 400 V / 50 Hz
2-post lift KPH370.45K
4.5 t, electrohydraulic, asymmetrical, arms for lifting of vans and off-road vehicles
2-post lift KPH370.45LIK
4.5 t, electrohydraulic, symmetrical, arms for lifting of long wheel base vans and easy loading of cars
Diagnostic kit STDADIAG
IDC5 KIT TEXA – Diagnostic setup for those who have a wheel alignment but no TEXA accessories
Diagnostic kit STDADIAG/SW
TEXA IDC5 SW KIT – Diagnostic setup for those who already have TEXA devices (e.g., ADAS RCSS)
2-post lift KPH370.50LIK
5.0 t, electrohydraulic, symmetrical, arms for lifting of long wheel base vans and easy loading of cars
Support trestle
7500 kg, 1330 – 2030 mm
Support trestle
10000 kg, 1235 – 2040 mm
Eyebolt
3.5 t – 4.2 t | facilitates installation of the lift, can be used again for other installations | 1 set
Spacers for pads
4 x 89 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | for SPOA3T | 1 set / 8 pieces
Spacers for pads
4 x 200 mm, incl. bracket for mounting on the pillars | 1 set / 4 pieces
Support pads
Kit with pads for TESLA | 1 set / 4 pieces
Support pads
U-shaped | 1 set / 4 pieces
Vehicle fuses
For turntable, Ø 120 mm | 1 set / 2 pieces
Crossbar height adjustment
Kit for increasing overhead cable passage height by up to +1.5 m | for spindle lifts | 1 set
Support pads 902023
Kit with pads for Fiat 500E, 500 ABARTH | 1 set / 4 pieces
Support pads 902146
Kit with pads for MEB platform | 1 set / 4 pieces
Wheel fork reduction
For wheels Ø 700 – 800 | 1 piece
Support plates
3.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Extension 100 mm (3000/4000/5500 kg) / 150 mm (7000/8500/10000 kg)
Inground cable connection kit
Allows columns connection cables to be placed inground | 1 piece
Warning light
Light signal “system in use”
Wheel free cross-beam max. 15000 kg
Crossbar for standard lifts with adjustable fork
Support plates
4 / 4.2 / 4.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Universal support Ø 35 mm
Mounting hole Ø 35 mm, suitable for holding various tools, such as the transmission plate GA passenger car | fitted with a bushing
Eyebolt
5.5 t | facilitates the handling and installation of the lift, reusable for multiple installations | 1 set
2-Post lift KPH370.70LIKTA
7.0 t, electrohydraulic, asymmetrical, supporting arms 4 x 3-piece
Tyre changer G1065.N
Mounting head and mounting lever, center lock, max. speed 15 rpm, passenger car, clamping capacity 12 – 24″, max. rim width 15″ (max. wheel width 381 mm), RAL 5005
Tyre changer G7641D.24PLUS
Mounting head and mounting lever, automatic, max. speed 16 rpm, passenger car, chucking table with double adjustable clamp position, rim diameter 10 – 26,5″, new reinforced frame, max. rim width 381 mm | Blue (RAL 5005)
Tyre changer G7641ID.24
Mounting head and mounting lever, automatic, max. speed 16 rpm, passenger car, chucking table with double adjustable clamp position, rim diameter 10 – 26,5″, new reinforced frame, max. rim width 381 mm | Blue (RAL 5005)
Tyre changer G7641D.24
Mounting head and mounting lever, automatic, max. speed 16 rpm, passenger car, chucking table with double adjustable clamp position, rim diameter 10 – 26,5″, new reinforced frame, max. rim width 381 mm | Blue (RAL 5005)
Tyre changer G7641IV.22
Mounting head and mounting lever, automatic, 2 speeds (max. 13 rpm), passenger car, chucking table with double adjustable clamp position, rim diameter 11 – 24,5″, new reinforced frame, max. rim width 381 mm | Blue (RAL 5005)
Tyre changer G7641V.22
Mounting head and mounting lever, automatic, 2 speeds (max. 13 rpm), passenger car, chucking table with double adjustable clamp position, rim diameter 11 – 24,5″, new reinforced frame, max. rim width 381 mm | Blue (RAL 5005)
Tyre changer G7645D.26PLUS
Automatic, max. speed 16 rpm, passenger car, rim diameter 10 – 28,5″, max. rim width 431 mm | Blue (RAL 5005)
Automatic tyre changer G7645ID.26
Max. speed 16 rpm, passenger car, clamping capacity 8 – 32″, max. rim width 17″ (max. wheel width 431 mm), RAL 5005
Automatic tyre changer G7645D.26
Max. speed 16 rpm, passenger car, clamping capacity 8 – 32″, max. rim width 17″ (max. wheel width 431 mm), RAL 5005
Tyre changer G7441V.22PLUS
Automatic, 2 speeds (max. 13 rpm), passenger car, rim diameter 10 – 24,5″, max. rim width 381 mm | Blue (RAL 5005)
Tyre changer G7441IV.22
Automatic, 2 speeds (max. 13 rpm), passenger car, rim diameter 10 – 24,5″, max. rim width 381 mm | Blue (RAL 5005)
Tyre changer G7441V.22
Automatic, 2 speeds (max. 13 rpm), passenger car, rim diameter 10 – 24,5″, max. rim width 381 mm | Blue (RAL 5005)
Tyre changer G7441.22
Automatic, 2 speeds (max. 13 rpm), passenger car, rim diameter 10 – 24,5″, max. rim width 381 mm | Blue (RAL 5005)
Tyre changer G7441.20
Automatic, max. speed 17,3 rpm, passenger car, rim diameter 10 – 24,5″, max. rim width 381 mm | Blue (RAL 5005)
Tyre changer G1500.3IT PLUS
Leverless, incl. 19″ TFT display and inflation device, max. speed 18 rpm, passenger car, clamping capacity 10 – 34″, max. rim width 15″ (max. wheel width 380 mm) | chuck with central clamping – suitable also for reverse wheels | for all tyre types with max. wheel diameter 54″ (1370 mm)
Semiautomatic tyre changer G7240.20
Swing series, max. speed 7,3 rpm, passenger car, clamping capacity 10 – 22,5″ (chucking table 20″), max. rim width 12″ (max. wheel width 305 mm), RAL 5005
Tyre changer G8645ID.26PLUS
Leverless, max. speed 16 rpm, passenger car, clamping capacity 8 – 32″, max. rim width 17″ (max. wheel width 431 mm), RAL 5005
Tyre changer G8945ITD.26S
Leverless, incl. inflation device, max. speed 15 rpm, passenger car, clamping capacity 10 – 26″, max. rim width 15″ (max. wheel width 381 mm) | chuck with central clamping – suitable also for reverse wheels | for all tyre types with max. wheel diameter 45″ (1143 mm)
Tyre changer G8945D.26S
Leverless, max. speed 15 rpm, passenger car, clamping capacity 10 – 26″, max. rim width 15″ (max. wheel width 381 mm) | chuck with central clamping – suitable also for reverse wheels | for all tyre types with max. wheel diameter 45″ (1143 mm)
Wheel balancer GTL4.140RC
22″ full HD LCD monitor, industrial PC, automatic cycle, cones for trucks (Ø 202 – 221 mm, 281 mm), with adapter and handwheel nut, wheel lift 200 kg, truck, rim diameter 10 – 26″ (manually adjustable up to 30″)
Wheel balancer GTL2.120NRC
Backlit LCD graphic display (132 x 40 mm), automatic cycle, cones for trucks (Ø 202 – 221 mm, 281 mm), with adapter and handwheel nut, wheel lift 200 kg, truck, rim diameter 10 – 26″ (manually adjustable up to 30″)
Outrigger plates 3.2 t | 1 set / 2 pieces
Allowing installation on floors with poor capacity or lower concrete thickness
Outrigger plates 5.5 t | 1 set / 2 pieces
Allowing installation on floors with poor capacity or lower concrete thickness
Stands for wheel alignment 1 set / 4 pieces
Support pads for Ducato / Boxer / Jumper | 1 set / 4 pieces
Kit with 4 pads – 2 front and 2 rear
Support pads for Mercedes G class | 1 set / 4 pieces
Kit with 4 pads – 2 front and 2 rear
Support pads for Sprinter / Crafter | 1 set / 6 pieces
Kit with 6 pads for Mercedes Sprinter and Volkswagen Crafter, old and new series
Tool support for impact wrench
Ergonomic holder
Tool trays | magnetic | 1 set / 2 pieces
Vehicles lift platforms | ramp height 60 mm | 1 set / 4 pieces
Ramps for extra low clearance vehicles
Width extension up to 3200 mm | for KPX35LLE
Enables columns to be widened up to 3200 mm
Sanitizer SNT-O3
Fully automatic, remote control via app
3D wheel aligner RAVTD3200HP.3
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 3-point clamps, 27″ TFT display and closed cabinet | Blue (RAL 5005)
3D wheel aligner RAVTD3200HP.3
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centring 3-point clamps, 27″ TFT display and closed cabinet, RAL 7040
3D wheel aligner RAVTD3200HPR.3
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 3-point clamps, 27″ TFT display and closed cabinet | Blue (RAL 5005)
3D wheel aligner RAVTD3200HPR.3
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centring 3-point clamps, 27″ TFT display and closed cabinet, RAL 7040
3D wheel aligner RAVTD3200L.3
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 3-point clamps, 22″ TFT display and open cabinet | Grey (RAL 7040)
3D wheel aligner RAVTD3200L.4
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 4-point clamps, 22″ TFT display and open cabinet | Grey (RAL 7040)
3D wheel aligner RAVTD3200SP.3
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 3-point clamps, 22″ TFT display and closed cabinet | Blue (RAL 5005)
3D wheel aligner RAVTD3200SP.3
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centring 3-point clamps, 22″ TFT display and closed cabinet, RAL 7040
3D wheel aligner RAVTD3200SP.4
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 4-point clamps, 22″ TFT display and closed cabinet | Blue (RAL 5005)
3D wheel aligner RAVTD3200SP.4
3D wheel aligner with HQ 3D measuring heads and Bluetooth data communication | incl. self-centring 4-point clamps, 22″ TFT display and closed cabinet, RAL 7040
4-post lift KP175E
10.0 t, electromechanical, symmetrical, lift for fork lifts
4-post lift KP440NE.9
24.0 t, electromechanical, symmetrical
4-post lift KP442E
12.0 t, electromechanical, symmetrical
4-post lift KP442NE
14.0 t, electromechanical, symmetrical
CCD wheel aligner RAVTD 8060P TWS
6 CCD truck wheel aligner, with standard sensors | incl. 4-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Blue (RAL 5005) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8060P TWS
6 CCD truck wheel aligner, with standard sensors | incl. 3-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Blue (RAL 5005) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8060P TWS
6 CCD truck wheel aligner, with standard sensors | incl. 3-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8060P TWS
6 CCD truck wheel aligner, with standard sensors | incl. 4-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8060P TWSR
6 CCD truck wheel aligner, with lowered sensors | incl. 4-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Blue (RAL 5005) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8060P TWSR
6 CCD truck wheel aligner, with lowered sensors | incl. 3-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Blue (RAL 5005) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8060P TWSR
6 CCD truck wheel aligner, with lowered sensors | incl. 3-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8060P TWSR
6 CCD truck wheel aligner, with lowered sensors | incl. 4-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8080P TWS
8 CCD truck wheel aligner, with standard sensors | incl. 4-point wheel clamps, closed cabinet, turntables and 24″ LCD display | Blue (RAL 5005) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8080P TWS
8 CCD truck wheel aligner, with standard sensors | incl. 3-point wheel clamps, closed cabinet, turntables and 24″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8080P TWS
8 CCD truck wheel aligner, with standard sensors | incl. 3-point wheel clamps, closed cabinet, turntables and 24″ LCD display | Blue (RAL 5005) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8080P TWS
8 CCD truck wheel aligner, with standard sensors | incl. 4-point wheel clamps, closed cabinet, turntables and 24″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8080P TWSR
8 CCD truck wheel aligner, with lowered sensors | incl. 4-point wheel clamps, closed cabinet, turntables and 24″ LCD display | Blue (RAL 5005) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8080P TWSR
8 CCD truck wheel aligner, with lowered sensors | incl. 3-point wheel clamps, closed cabinet, turntables and 24″ LCD display | Blue (RAL 5005) | 1 x 230 V / 50 – 60 Hz
CCD wheel aligner RAVTD 8080P TWSR
8 CCD truck wheel aligner, with lowered sensors | incl. 3-point wheel clamps, closed cabinet, turntables and 24″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz