Accessories lifts
Elevate your workshop lifts to the next level with Ravaglioli’s premium accessories. From control boxes to adaptors and kits, our selection of accessories lifts will enhance your lifting operations.
Showing 100–198 of 214 results
-
Jacking beam slides for J50HA-PHA-J30K-KL-PK-PKL
for J50HA-PHA-J30K-KL-PK-PKL
-
LED lighting kit
-
LED lighting kit 4-fold, 24 V
-
LED lighting kit 6-fold
-
Lifting bracket
-
Limit switch | operated by bar | for 1-phase power supply | supplied not installed
For all lifts with 1-phase power supply
-
Limit switch | operated by bar | for 3-phase power supply | supplied not installed
For all lifts with 3-phase power supply
-
Limit switch | operated by elastic spring | supplied not installed
For all the lifts with control unit in the upper part of the column (VARPH370.xx/T)
-
Long front ramps
-
Long front ramps
1200 mm
-
Manual pump for emergency descent
-
Pads 2.7 – 3.2 t | 1 set / 4 pieces
For lifts with capacity 2.7 – 3.2 t
-
Pads frame adapters kit
Pads frame adapters kit Ø 120 mm (1 set, 2 pcs), for turntable
-
Pipe cover 1 m
For surface installation of lifts
-
Portable lift kit with 1 wheeled handle and 2 wheels
For low-rise lifts
-
Post covers for 4-post lift
-
Post covers for RAV4651L, RAV4652L, RAV4800, RAV4802
-
Power unit driver side | 13.12 ft
-
Power unit driver side | 16.40 ft
-
Power unit driver side | 6.56 ft
-
Power unit driver side | 9.84 ft
-
Power unit passenger side | 13.12 ft
-
Power unit passenger side | 16.40 ft
-
Power unit passenger side | 6.56 ft
-
Power unit passenger side | 9.84 ft
-
Recessed installation kit
-
Recessed installation kit
-
Recessed installation kit
-
Recessed installation kit
-
Retrofit kit Parking position switch rolling jack
For scissor lift S38/S50
-
Rubber pads
120 mm | suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N6.193964, RAV.650N5.193902, RAV.660N2.193360, RAV.650N5.193018, RAV.650N6.193025, RAV.640N5.193049, RAV.640N4.192998, RAV.640N3.192981, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 4 pieces
-
Rubber pads
20 mm | suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N6.193964, RAV.650N5.193902, RAV.660N2.193360, RAV.650N5.193018, RAV.650N6.193025, RAV.640N5.193049, RAV.640N4.192998, RAV.640N3.192981, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 4 pieces
-
Rubber pads
200 mm | suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N6.193964, RAV.650N5.193902, RAV.660N2.193360, RAV.650N5.193018, RAV.650N6.193025, RAV.640N5.193049, RAV.640N4.192998, RAV.640N3.192981, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 4 pieces
-
Rubber pads
40 mm | suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N6.193964, RAV.650N5.193902, RAV.660N2.193360, RAV.650N5.193018, RAV.650N6.193025, RAV.640N5.193049, RAV.640N4.192998, RAV.640N3.192981, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 4 pieces
-
Rubber pads
60 mm | suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N6.193964, RAV.660N2.193360, RAV.650N6.193025, RAV.640N5.193049 and RAV.640N4.192998 | 1 set / 4 pieces
-
Seat for turntables | plates and slip plates excluded | 1 set
For RAV4350, RAV4401, RAV4405L, RAV4501L, RAV4651L, RAV4800
-
SmartCart Agrar
Transport and storage trolley for the adapter set for agricultural vehicles – The adapters and mounting pieces are tidied away in the workshop
-
Spacers 140 mm
For Fiat Ducato, Peugeot Boxer and Citroën Jumper | for quick drop-in of the K arms, Ø 45 mm | 1 set / 4 pieces
-
Spacers 140 mm | or quick drop-in of the R arms
Set of pad extensions for 2-post lifts | 1 set / 4 pieces
-
Spacers 140 mm, bushing Ø 60 mm | 1 set / 4 pieces
-
Spacers 200 mm
For Fiat Ducato, Peugeot Boxer and Citroën Jumper | bushing Ø 45 mm | 1 set / 4 pieces
-
Spacers 200 mm, bushing Ø 60 mm | 1 set / 4 pieces
200 mm, bushing Ø 60 mm | 1 set / 4 pieces
-
Spacers 80 mm
For Fiat Ducato, Peugeot Boxer and Citroën Jumper | for quick drop-in of the K arms, Ø 45 mm | 1 set / 4 pieces
-
Spacers 80 mm, bushing Ø 60 mm | 1 set / 4 pieces
-
Spacers for 4-post lifts
To close turntable housing (As a replacement for turntables) | 1 set / 2 pieces
-
Spacers for 4-post lifts
To close turntable housing (As a replacement for turntables) | 1 set / 2 pieces
-
Spacers for 4-post lifts
To close turntable housing (As a replacement for turntables) | 1 set / 2 pieces
-
Spacers for 4-post lifts
To close turntable housing (As a replacement for turntables) | 1 set / 2 pieces
-
Spacers for pads
4 x 200 mm, incl. bracket for mounting on the pillars | 1 set / 4 pieces
-
Spacers for pads for electromechanical lifts
4 x 89 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | 1 set / 8 pieces
-
Stands for alignment
1 set / 4 pieces
-
Support plates
4 / 4.2 / 4.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
-
Support plates
3.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
-
Support plates for floors with a concrete thickness of 100 – 150 mm (+ 15 mm)
Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 100 – 150 mm | 1 set / 2 pieces
-
Support plates for floors with a concrete thickness of 100 – 150 mm (+ 15 mm)
Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 100 – 150 mm | 1 set / 2 pieces
-
Support plates for floors with a concrete thickness of 150 mm (+20 mm)
Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 150 mm | 1 set / 2 pieces
-
Support set for wheel free
-
Support trestle
10000 kg, 1235 – 2040 mm, height adjustable in 6 x 100 mm steps, additionally with infinitely adjustable upper part (115 mm), 2 rollers, U-shaped holder and prismatic holder (interchangeable) | Grey (RAL 7040)
-
Support trestle
10000 kg, 1235 – 2040 mm, height adjustable in 6 x 100 mm steps, additionally with infinitely adjustable upper part (115 mm), 3 springy wheels, U-shaped holder and prismatic holder (interchangeable), ready assembled | Grey (RAL 7040)
-
Supporting bars
For frame installation / lift + frame installation into the foundation
-
Supports for spacers, bushing Ø 45 mm
For 2-post lifts | 1 set / 2 pieces
-
Tool trays
Magnetic | 1 set / 2 pieces
-
Tool trays | magnetic | 1 set / 4 pieces
-
Towing lever Capacity 3000 / 4000 / 5500 kg
-
Transport trolley for ramp set
Trolley for drive-on kit for forklift trucks M140124BG / M140127BG
-
Traverse for HydroLift S3 7,5/8,2
Max. load bearing capacity 16.4 t, king pin support | only in conjunction with traverse (item no. 119777)
-
Traverses for XS30-CAT
For vans and off-road vehicles | 1 set / 2 pieces
-
Turntable covers for 615 mm platforms
Spacers to completely close turntable recess | suitable for RAV.640N2.193117, RAV.640N2.193469, RAV.640N2.193001, RAV.640N2.193582, RAV.640N2.193216, RAV.640N3.192981 and RAV.640N2.193476 | 1 set / 2 pieces
-
Turntable covers for 650 mm platforms
Spacers to completely close turntable recess | suitable for RAV.650N2.193797, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N5.193902, RAV.650N5.193018, RAV.640N5.193049, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 2 pieces
-
U-support
-
Universal support Ø 35 mm
Mounting hole Ø 35 mm, suitable for holding various tools, such as the transmission plate GA passenger car | fitted with a bushing
-
Vehicles lift platforms
Ramp height 60 mm, for extremely low vehicles | 1 set / 2 pieces
-
Version on demand for KPH370.32R | with single lifting/lowering control, pneumatic release of locking devices and control unit on the upper part of the column
for KPH370.32R | with single lifting/lowering control, pneumatic release of locking devices and control unit on the upper part of the column
-
Wheel fork extension 150 mm
Extensions for adjustable fork (1 per column) | 1 set
-
Wheel fork extension 150 mm
Ideal for lifting motorhomes where the wheels are mounted behind the coachwork, incl. wheel forks and base frame extensions | load capacity is reduced to 4 t | 1 set (for 1 wheel gripper)
-
Wheel fork extension for ArtisLift MRG55
Length approx. 123 mm | load capacity is reduced to 5 t | 1 set (for 1 wheel gripper)
-
Wheel fork reduction for mobile column lifts | tires Ø 700 – 500 mm
Reduction of the wheel fork for tires from Ø 700 mm to Ø 500 mm | 1 piece/per column
-
Wheel fork reduction for mobile column lifts | tires Ø 800 – 700 mm
Reduction of the wheel fork for tires from Ø 800 mm to Ø 700 mm | 1 piece/per column
-
Wheel fork reduction for mobile column lifts | tires Ø 900 – 800 mm
Reduction of the wheel fork for tires from Ø 900 mm to Ø 800 mm | 1 piece/per column
-
Wheel-lifting platform kit
-
Width extendion 200 mm
-
Width extendion 200 mm
200 mm
-
Jacking beam J17X
2.0 t, Hydraulic, with hand-pump | for all hydraulic 4-post lifts / scissor lifts
-
Jacking beam J20NX
2.0 t, hydraulic, operated by means of hand-pump
-
Jacking beam J20PNR
2.0 t, air-hydraulic
-
Jacking beam J20PNRL
2.0 t, air-hydraulic
-
Jacking beam J20PNX
2.0 t, air-hydraulic
-
Jacking beam J20PNXL
2.0 t, air-hydraulic
-
Jacking beam J30PKL
3.0 t, air-hydraulic
-
Jacking beam J30PR
3.0 t, air-hydraulic
-
Jacking beam J30PRL
3.0 t, air-hydraulic
-
Jacking beam J30PX
3.0 t, air-hydraulic
-
Jacking beam J30PXL
3.0 t, air-hydraulic
-
Jacking beam J30X
3.0 t, hydraulic, operated by means of hand-pump
-
Jacking beam J40PKL
4.0 t, air-hydraulic
-
Jacking beam J40PRL
4.0 t, air-hydraulic
-
Jacking beam J40PXL
4.0 t, air-hydraulic
-
Jacking beam J40PY
4.0 t, air-hydraulic
-
Jacking beam J50PHA
5.0 t, air-hydraulic