Accessories 2-post lifts
Ensure safety and stability during lifting operations by using accessories for 2-post lifts such as pads and supports.
Showing all 31 results
-
Crossbar height adjustment
Kit for increasing overhead cable passage height by up to +1.5 m | for spindle lifts | 1 set
-
Door protections for 2-post lifts
1 set / 2 pieces
-
Energy kit for KPH370.xx
Compressed air connection and 230 V socket | 1 piece
-
Eyebolt
3.5 t – 4.2 t | facilitates installation of the lift, can be used again for other installations | 1 set
-
Eyebolt
5.5 t | facilitates the handling and installation of the lift, reusable for multiple installations | 1 set
-
Inground cable connection kit
Allows columns connection cables to be placed inground | 1 piece
-
Limit switch | operated by bar | for 1-phase power supply | supplied not installed
For all lifts with 1-phase power supply
-
Limit switch | operated by bar | for 3-phase power supply | supplied not installed
For all lifts with 3-phase power supply
-
Limit switch | operated by elastic spring | supplied not installed
For all the lifts with control unit in the upper part of the column (VARPH370.xx/T)
-
Pads 2.7 – 3.2 t | 1 set / 4 pieces
For lifts with capacity 2.7 – 3.2 t
-
Pads frame adapters kit
Pads frame adapters kit Ø 120 mm (1 set, 2 pcs), for turntable
-
Spacers 140 mm
For Fiat Ducato, Peugeot Boxer and Citroën Jumper | for quick drop-in of the K arms, Ø 45 mm | 1 set / 4 pieces
-
Spacers 140 mm | or quick drop-in of the R arms
Set of pad extensions for 2-post lifts | 1 set / 4 pieces
-
Spacers 200 mm
For Fiat Ducato, Peugeot Boxer and Citroën Jumper | bushing Ø 45 mm | 1 set / 4 pieces
-
Spacers 200 mm, bushing Ø 60 mm | 1 set / 4 pieces
200 mm, bushing Ø 60 mm | 1 set / 4 pieces
-
Spacers 80 mm
For Fiat Ducato, Peugeot Boxer and Citroën Jumper | for quick drop-in of the K arms, Ø 45 mm | 1 set / 4 pieces
-
Spacers for pads
4 x 200 mm, incl. bracket for mounting on the pillars | 1 set / 4 pieces
-
Spacers for pads for electromechanical lifts
4 x 89 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | 1 set / 8 pieces
-
Stands for alignment
1 set / 4 pieces
-
Support plates
4 / 4.2 / 4.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
-
Support plates
3.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
-
Support plates for floors with a concrete thickness of 100 – 150 mm (+ 15 mm)
Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 100 – 150 mm | 1 set / 2 pieces
-
Support plates for floors with a concrete thickness of 100 – 150 mm (+ 15 mm)
Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 100 – 150 mm | 1 set / 2 pieces
-
Support plates for floors with a concrete thickness of 150 mm (+20 mm)
Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 150 mm | 1 set / 2 pieces
-
Supports for spacers, bushing Ø 45 mm
For 2-post lifts | 1 set / 2 pieces
-
Tool trays
Magnetic | 1 set / 2 pieces
-
Tool trays | magnetic | 1 set / 4 pieces
-
Vehicles lift platforms
Ramp height 60 mm, for extremely low vehicles | 1 set / 2 pieces
-
Version on demand for KPH370.32R | with single lifting/lowering control, pneumatic release of locking devices and control unit on the upper part of the column
for KPH370.32R | with single lifting/lowering control, pneumatic release of locking devices and control unit on the upper part of the column
-
Width extendion 200 mm
200 mm
-
Width extendion 200 mm